Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ 2013 F20 Heating control panel (basic) not functioning
23-02-2023, 15:25 PM,
Post: #1
|
|||
|
|||
2013 F20 Heating control panel (basic) not functioning
Hi, All
I have this 2013 F20, it had heating control panel replaced with a used one to same spec. However, it does not respond to any buttons on the panel. The fan is running and there is the middle green light for fan speed is lit. In Ista it’s coming up with code 8011CB Control panel on the heating-air conditioning system. Under voltage or Overvoltage error. Go through the test plan and no stored error detected. Also, the error clears but comes back on as soon as you rescan. Any ideas will be appreciated.. |
|||
23-02-2023, 18:08 PM,
Post: #2
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
(23-02-2023, 15:25 PM)Dee67 Wrote: Hi, All Hi, You probably installed a panel from a 2014+ year car. Panels from 2014+ do not fit to -2014. And vice versa too |
|||
23-02-2023, 18:11 PM,
Post: #3
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
HI
Remember ihka must be coded correctly first and then turn off a/c compressor learn in. check abl for ihka compressor in ista. |
|||
23-02-2023, 18:44 PM,
Post: #4
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
Thanks for your replies, since posting this I have researched further and yes the panel may be from later vehicle (the label has been removed).
I shall get another panel and report back. Yes, I did code it but to no effect. |
|||
23-02-2023, 19:06 PM,
Post: #5
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
(23-02-2023, 18:44 PM)Dee67 Wrote: Thanks for your replies, since posting this I have researched further and yes the panel may be from later vehicle (the label has been removed). Yes, it`s true. You need a panel before 2014 year production |
|||
23-02-2023, 20:52 PM,
Post: #6
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
Did you code IHKA with 534?
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
23-02-2023, 21:03 PM,
Post: #7
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
If you read with Ista , click on the module IHKA on the ecu tree and you can see the part number of the unit.
|
|||
24-02-2023, 07:09 AM,
Post: #8
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
|
|||
24-02-2023, 07:26 AM,
Post: #9
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
right answer in #2 message
* you still can get new panel to work by replacing CPU in it or reflashing it with dump from an old one panel BMW tuning & retrofitting, https://www.instagram.com/cebepspb/
* lifetime EVO, ROUTE codes, Carplay, ECU Remap and other crap |
|||
24-02-2023, 07:40 AM,
Post: #10
|
|||
|
|||
RE: 2013 F20 Heating control panel (basic) not functioning
(24-02-2023, 07:26 AM)CEBEP Wrote: right answer in #2 message Thanks. I am going to get another panel today. However, as I don't have the old panel for the dump. Is there another way of getting that dump file and injecting into the panel I already have? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content