Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
M140i F20 program key
19-07-2023, 15:14 PM,
Post: #1
|
|||
|
|||
M140i F20 program key
Hi everyone, i am having trouble to program second key on this car.
FEM unlocked with VVDI2, original used BMW key virginized with VVDI prog. Once it's done, no remote and need to put key near ignition to start car... Car is 434mhz, used key is 434mhz If this post helped you don't forget to press rep and thanks buttons
|
|||
19-07-2023, 15:40 PM,
Post: #2
|
|||
|
|||
RE: M140i F20 program key
Try to generate a new aftermarket key with 433Mhz. i had Problems to after virginize Original key since then i used only NEW Keys.
|
|||
19-07-2023, 15:54 PM,
Post: #3
|
|||
|
|||
RE: M140i F20 program key
ok, so, should work with new chinese key ?
If this post helped you don't forget to press rep and thanks buttons
|
|||
19-07-2023, 17:08 PM,
Post: #4
|
|||
|
|||
RE: M140i F20 program key
Programming FEM with E~sys
|
|||
19-07-2023, 17:18 PM,
Post: #5
|
|||
|
|||
RE: M140i F20 program key
Refresh the key with hexprog, if u only have vvdi, ill send u files that will work correctly
|
|||
19-07-2023, 17:38 PM,
(This post was last modified: 19-07-2023, 17:39 PM by bm92.)
Post: #6
|
|||
|
|||
RE: M140i F20 program key
(19-07-2023, 17:08 PM)BJBMW Wrote: Programming FEM with E~sys Ok, but why? The problem shouldn't be in FEM ? (19-07-2023, 17:18 PM)Mwahab Wrote: Refresh the key with hexprog, if u only have vvdi, ill send u files that will work correctly Yes my friend, i only have VVDI no hexprog If this post helped you don't forget to press rep and thanks buttons
|
|||
19-07-2023, 20:38 PM,
Post: #7
|
|||
|
|||
RE: M140i F20 program key
You need to write correct eeprom and erom to PCF... and after remote will work
|
|||
19-07-2023, 20:56 PM,
Post: #8
|
|||
|
|||
RE: M140i F20 program key
(19-07-2023, 20:38 PM)Xeid51 Wrote: You need to write correct eeprom and erom to PCF... and after remote will work Ok thanks, where can i find that ? If this post helped you don't forget to press rep and thanks buttons
|
|||
01-12-2023, 17:46 PM,
Post: #9
|
|||
|
|||
RE: M140i F20 program key
Hi everyone, can someone help me to flash FEM with e-sys because there no new SWFL even with latest psdzdata...
FEM is already unlocked by someone else, that's why i would like to flash to stock... I already killed 2 keys. Just to remember, original key from car works perfectly, remote lock and unlock, keyless starts ok. When i want to program another key (original or chinese), no remote, need to put the key near to the coil to start the car... Thank you If this post helped you don't forget to press rep and thanks buttons
|
|||
01-12-2023, 19:02 PM,
Post: #10
|
|||
|
|||
RE: M140i F20 program key
Did u try to reset the key like i told u?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Update ISTA at once 4.43.40 (ISTA Update Program) | charlesjyw | 39 | 8,297 |
08-05-2024, 21:13 PM Last Post: shaggyshadow |
|
Looking for a car which has secure coding to program | Fx82 | 0 | 241 |
18-03-2024, 22:57 PM Last Post: Fx82 |
|
Can the dealer program a used KAFAS4? | BimmerSLO | 7 | 574 |
02-03-2024, 18:01 PM Last Post: tonemoz |
|
2005 e90 330i msv70 stuck at program abort mode | mercuris | 22 | 1,306 |
07-08-2023, 07:52 AM Last Post: mercuris |
|
Solved ✔ M140i F20 cold start delete | bm92 | 5 | 581 |
21-07-2023, 10:25 AM Last Post: bm92 |
|
Solved ✔ F20 M140i B58 PPF Delete Please | Mwahab | 5 | 781 |
31-05-2023, 21:18 PM Last Post: Mwahab |
|
Program initialization error | Mauker33 | 2 | 325 |
24-03-2023, 04:02 AM Last Post: Mauker33 |
|
BMW X6 e72 Program Virgin ecu | smurf786 | 2 | 349 |
20-10-2022, 21:10 PM Last Post: pereq |
|
Solved ✔ request program bmw HDD-Update | sra | 2 | 676 |
05-06-2022, 20:25 PM Last Post: sra |
|
Solved ✔ Program used kombi on F23 | bm92 | 7 | 781 |
31-08-2019, 19:27 PM Last Post: bm92 |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content