Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F31 06/17 backup camera retrofit, not showing up in ESys
18-08-2023, 08:00 AM,
Post: #11
RE: F31 06/17 backup camera retrofit, not showing up in ESys
With reversing camera:
- F30 use icam from 07/2017.
- F31 does not support icam.
- The information required to install the Icam is incorrect. Please check wiring, fuse and ecu.
Ps: If your car has been retrofit nbt evo, you can retrofit icam (icam needs to be coded on benh and wiring is also different)

- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- FSC 1AA002 OEM for remove component protection MGU18/21 (only case BDC replace).
- ID8.5 (SFA) conversion/ change region map.
- Virgin Kafas4, MRR, RAM used.
- Mgu patch, fsc custom match to vin, remove CP.
- Reset ISN 7DTC, 8HP for F, G serie (include EGS7).
- Write ISN MG1/MD1 with remotely.
- Carplay/Android Auto MGU with/without ATM (6AE).
Skype live:laquangksxd
Quote this message in a reply
18-08-2023, 08:38 AM,
Post: #12
RE: F31 06/17 backup camera retrofit, not showing up in ESys
For vehicles with reversing camera and surround view. Control unit Front Electronic module FEM To 07-2017
Quote this message in a reply
18-08-2023, 09:44 AM,
Post: #13
RE: F31 06/17 backup camera retrofit, not showing up in ESys
(18-08-2023, 08:38 AM)henkdejong Wrote:  For vehicles with reversing camera and surround view. Control unit Front Electronic module FEM To 07-2017

All FEM's modules with hw. lower than 9.0 does not support the ICAM camera!
If your hw is not 9.0 and it probably isn't, because they came out after 07/2017, the ICAM camera will not be visible in esys! then you only have two options to make it work.

• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE •
• NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH •
• HDD -> SSD NBT/NBTevo/MGU
• CARPLAY NBTevo/EN2/MGU •
• FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, •
• REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU •
UK BASED!
Quote this message in a reply
18-08-2023, 19:38 PM,
Post: #14
RE: F31 06/17 backup camera retrofit, not showing up in ESys
I was successfull with pinning it A173*7B, not *8B, still on pin 51 and 52, somehow it doesn´t make sense to me, but this way I got it showing up in E-Sys.

Oh btw, earlier I pinned it to fuse 159, 154, 159 had same color, so it made more sense to me


Attached Files Thumbnail(s)
   
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  F20 cruise control retrofit maninblack 6 161 Yesterday, 16:26 PM
Last Post: maninblack
  BMW F31 acc retrofit help Pedrom92 10 1,380 23-05-2024, 22:56 PM
Last Post: azwgh
XZBMW XML file needed for esys please iyade46 2 65 23-05-2024, 22:51 PM
Last Post: jaramillo
XZBMW G30 Entrynav2 - rear camera retrofit problem Krysiaman 19 1,362 23-05-2024, 20:39 PM
Last Post: Node
XZBMW Entrynav2 to NBT EVO retrofit, no rear view camera image jce777 2 64 23-05-2024, 20:31 PM
Last Post: jce777
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 113 37,804 23-05-2024, 15:42 PM
Last Post: hashtagmaster
XZBMW coding drl taillight x3 g1 with esys kwastmichiel 12 1,353 22-05-2024, 11:57 AM
Last Post: Richard_1360
  GenEsys Creator (New Tool FA ESYS) scorpium59 419 31,305 22-05-2024, 06:43 AM
Last Post: alsamaraee
XZBMW BMW e87 LCI hralights retrofit problem XeoN 0 34 21-05-2024, 21:17 PM
Last Post: XeoN
ZBentley Tool to use to cut leather dashboard for hud retrofit Fx82 3 317 19-05-2024, 15:29 PM
Last Post: Fx82

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content