Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Frontera 2.0 PSG16 read problem
15-02-2024, 17:50 PM,
Post: #1
|
|||
|
|||
Frontera 2.0 PSG16 read problem
Hi to all
I need solution for this if anybody know. Opcom shows that it is a PSG16 ecu but there is no CAN L I H wire in the socket. I made a new connector with connected ground, power and CAN L I H but it won't read. I tried it as a zafira 2.0 PSG CAN with MPPS v18. Frontera 2,0 no option to read with mpps psg16. I want to egr off any solution to read with K line. Best regards |
|||
15-02-2024, 17:54 PM,
Post: #2
|
|||
|
|||
RE: Frontera 2.0 PSG16 read problem
mpps v18 read this perfect but connect it to the pump connector
No help for people not give a feedback
|
|||
Reputation: +2 - ROD-BENDERS [+1] , dabaca [+1] | |||
17-02-2024, 13:28 PM,
Post: #3
|
|||
|
|||
RE: Frontera 2.0 PSG16 read problem
I tried with that connection but it doesn't work, the pump has two jacks, one has no can line while the other can't be removed, it's inaccessible. Is there no other connection? I saw that pcflash goes differently. Has anyone tried it.
Best regards |
|||
18-02-2024, 09:20 AM,
(This post was last modified: 18-02-2024, 09:24 AM by temaindustriale.)
Post: #4
|
|||
|
|||
RE: Frontera 2.0 PSG16 read problem
Follow this tutorial and it will shure work...
I have made my self a cable with this ecu, used : vdd:49,51,53,55 gnd:50,52,54,56 ignition 16 kline 6 can h 29 can l 17 i used it with immobilizer via kline for pairing! |