[Prazcon]

Hi all,

I currently have a Tactrix clone, which works fine with Xentry. However, for a while now I am trying to get it to work with ODIS.

In a lot of instances I can select the Openport in ODIS but and it tests out correctly but when I try to connect to a car, it gives an error. Please see attachments.

Does anyone have an idea how to fix this?

KR

Mike

[JorBo]

For me never works on Odis 6.2 and newer. If you want to works with J2534, W10-W11 is required and cheap device for example, Godiag J2534 (not detect ignition) or VNCI that works "similar" to 5054 or 6154.

[pupu144]

I currently have a Tactrix clone, which works fine with Xentry. However, for a while now I am trying to get it to work with ODIS.

Some driver issues.
I have no experience with Tactrix tools, but if the clone is using own drivers (not the same as the legit device) - this might be it, and it will never get fixed, as there is usually no support for clones.

If it can work with the official driver from Tactrix website - well, try your luck and troubleshoot this issue with Tactrix dev team. (although I doubt it)