[scorpium59]

All is good i think but ista not start.

Try, only for a test, the old 3.49 istagui.exe.config

Rename the original in istagui.exe.config.350 and copy the old one in the same folder.

Yes ista start correctly with istagui.exe.config 3.49

I leave with this file?

[KaiO]

Can anyone post how to activate newest admin client?
I still have 1.8.08 running

[BmwMerc]

Can anyone post how to activate newest admin client?
I still have 1.8.08 running

Same here. Still use 1.1.808. would be nice to have 3.0.7.

[jimmy9980]

I reinstalled Ista and now the ICOM works. Maybe bad install who knows

[Mrg0721]

1. download SuperOrca(free)
2. edit .msi file with SuperOrca (set LaucherNotFound and NotCalledByLaucher--> 0)
3. Execute .msi file and install (all necessary files have to be in the same directory)
4. extract datapackage file and copy extracted SQLite databases to your SQLite databases folder of your installatio directory
5. edit registry for x64 system it's:

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BMWGroup\ISPI\ISTA]
"DataVersion"="3.50.10"

Start ISTA

a popup will appear that reminds you to check ISPI process blabla and that data can only be stored on local drive.. Just ignore.

No need to use different ISTAGUI.exe files or something similar

I was going to ask what the procedure was to edit the msi file because i was not sure of the way i did it and then i came across your post and its how i did it, except the editing part, where exactly do you put the zeros? In what cell(s)? Thank you!

[smlee747]

Hi..
ISTA Launcher installed.. ISTALauncher click is fault message 'The shared storage (")is not accessible!
What problem?

[ap535d]

1. download SuperOrca(free)
2. edit .msi file with SuperOrca (set LaucherNotFound and NotCalledByLaucher--> 0)
3. Execute .msi file and install (all necessary files have to be in the same directory)
4. extract datapackage file and copy extracted SQLite databases to your SQLite databases folder of your installatio directory
5. edit registry for x64 system it's:

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BMWGroup\ISPI\ISTA]
"DataVersion"="3.50.10"

Start ISTA

a popup will appear that reminds you to check ISPI process blabla and that data can only be stored on local drive.. Just ignore.

No need to use different ISTAGUI.exe files or something similar

I was going to ask what the procedure was to edit the msi file because i was not sure of the way i did it and then i came across your post and its how i did it, except the editing part, where exactly do you put the zeros? In what cell(s)? Thank you!

See post #27 in this thread.

[Mrg0721]

1. download SuperOrca(free)
2. edit .msi file with SuperOrca (set LaucherNotFound and NotCalledByLaucher--> 0)
3. Execute .msi file and install (all necessary files have to be in the same directory)
4. extract datapackage file and copy extracted SQLite databases to your SQLite databases folder of your installatio directory
5. edit registry for x64 system it's:

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BMWGroup\ISPI\ISTA]
"DataVersion"="3.50.10"

Start ISTA

a popup will appear that reminds you to check ISPI process blabla and that data can only be stored on local drive.. Just ignore.

No need to use different ISTAGUI.exe files or something similar

I was going to ask what the procedure was to edit the msi file because i was not sure of the way i did it and then i came across your post and its how i did it, except the editing part, where exactly do you put the zeros? In what cell(s)? Thank you!

See post #27 in this thread.

Ah my mistake. I had seen the post, just paid no attention to the attachments. Thank you very much!

[BMW888]

Hi all,
I am new here. Thanks sangandi's ISPI NEXT Tool and who kindly shared ISTA/d and ISTA/P update packages. I have success installed ISTA/D 3.50.10 and ISTA/P 3.56.1.002. But i have a problem with ISTA/D. I can not find RR in ISTA/D. Could you expert show me how to active RR in ISTA/D?
Thanks in advance!

---

ISTAGUI.exe.rar
File Type:
Downloaded:	55 times
Size:	2.83 KB

Knows someone how the error removed here.

Use this file to replace original one. It worked for me.
If it help you. Pls hit Thanks and reputation !

[psampson]

Knows someone how the error removed here.

<add key="BMW.Rheingold.CoreFramework.PUKActive" value="false" />

Works - thank you very much!