[sascha024]

Hi

has someone modified the german version of opcom for german guy´s
or mixed it with german database


see you

[mattydr67]

There's german version modified
The version that works as vauxcom120309a its not for share and not for sell
There's other solutions for any clone not moded. One of them using meds others only the original not moded software. All this cannot be shared and ofcourse not for share. Because its useing original activation and if it will be made public then the genuine tool could be easy banned
There s also German Professionals version for moded opcom tool that we name it HQ clone. And you need to buy it.
Good luck

[zbigel]

Hi,

I tried to use "VAUX-COM 120309a+131223d" and I encountered the following problem:




I am working on Win7 64bit. I've installed the right ftdi driver. I have no problem with re-flashing/re-programming PIC with ocflash but OP-COM doesn't work.
I tried to run the same on Win Xp 32bit and there is no problem.

I believe there are some problems with FTDI Faker.
Did you see guys such problems? Are you able to help me?
Thanks
Z

[mar.wo]

Hi M8s
I've downloaded op-com and it works perfect but problem is next day. I have to always make a new instalation. What is wrong? XP sys. Thanks.

[mattydr67]

@zbigel
Hey mate I belive that your problem is the ftdi. Try to reflash it with the right ept
Ftdi faker is doing its job there
Goid luck

---

Hi M8s
I've downloaded op-com and it works perfect but problem is next day. I have to always make a new instalation. What is wrong? XP sys. Thanks.

Check if you have any virus there
I really do not what understand whats exaclly happen next day
Do not start or it ask for activation ?
Good luck

[mar.wo]

@zbigel
Hey mate I belive that your problem is the ftdi. Try to reflash it with the right ept
Ftdi faker is doing its job there
Goid luck

---

Hi M8s
I've downloaded op-com and it works perfect but problem is next day. I have to always make a new instalation. What is wrong? XP sys. Thanks.

Check if you have any virus there
I really do not what understand whats exaclly hapoen next day
Do not start or it ask for activation ?
Good luck

No any virus but another version of op-com and maybe it disturbs. What interesting in it, i've instaled op-com from this plot in another laptop(xp too) and this one works perfectly. Good luck

[zbigel]

Thanks for answer
I believe if ftdi ept was the problem it shouldn't work with WinXp, right? But it works. I am able to use op-com under WinXp 32bit.

I encountered another issue. I can't read any Engine ECU data. There is no problem with other ECUs. Just get:
"
Identifier: 0x15F4
VIN: W0L0SDL68B4350208
Hardware number:55574338
Motor type: A13DTC
Part Number:55580830
Software version number: 00000000
Hardware manufacturer number:
Programming Date: FFFFFFFF
Hardware key number: 0000000000
System description: BOSCH0100
Variant programming: 0x38363030545137303131343430333930
Alpha code: TQ
Hardware manufacturer system name: EDC17C18
"
And there are only "Fault codes" and "Measurement Block" available. But I can read any data using "Measurement Block".
Is it known problem? Is it op-com app or interface problem? Or maybe this is my Engine ECU problem?

Thanks
Z

[mattydr67]

Mate please first of all please share pics always
Then if there are only fault code and measuring blocks and the other buttons as Specal functions or Programming are still grey this means that that functions are not aviable for your controlers
Just let me make you understand. The op-com its an interface that let you make a connection between diagnostic softwsre in computer and ecus's in your xar ( useing protocols )
So if ca connect to a controler that means that tool is doing its job ( transmiti g and reciving data )
All the other depending by your software and ecu's in your car
If the Programmigng as SPS Programming ned a passthrue compatible interface then this could not be pissible with an op-com because its not a passthru interface
As I can see are you useing this mixed version of vaux-com and this could be your problem too
Because as we discused many tines the data base from 131223d its not compatible with the 120309a exe file and its license
As well can be a buf of a original softwsre too
Or it can be a bug of a FTDI faker v1.5 too
So share more details about your car/model/year, share pics and maybe I can help you or anyone else in this forum can
Good luck

[obdstart]

Thanks for answer
I believe if ftdi ept was the problem it shouldn't work with WinXp, right? But it works. I am able to use op-com under WinXp 32bit.

I encountered another issue. I can't read any Engine ECU data. There is no problem with other ECUs. Just get:
"
Identifier: 0x15F4
VIN: W0L0SDL68B4350208
Hardware number:55574338
Motor type: A13DTC
Part Number:55580830
Software version number: 00000000
Hardware manufacturer number:
Programming Date: FFFFFFFF
Hardware key number: 0000000000
System description: BOSCH0100
Variant programming: 0x38363030545137303131343430333930
Alpha code: TQ
Hardware manufacturer system name: EDC17C18
"
And there are only "Fault codes" and "Measurement Block" available. But I can read any data using "Measurement Block".
Is it known problem? Is it op-com app or interface problem? Or maybe this is my Engine ECU problem?

Thanks
Z

Use version v120309a, not mixed versions, then you see what happened

[jpbroad1970]

Hi
I don't know if this is the place for this but im using this software it it works great for everything but it it wont let me change the variant config to enable Bluetooth in the head unit keeps saying cant decode 0x0000241 and another one I cant remember think its 0x0000205

any ideas or help appreciated its a astra h head unit cd30mp3 2008

thanks
john