Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
|
01-08-2015, 16:10 PM,
Post: #11
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Use an enet cable
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
01-08-2015, 17:57 PM,
Post: #12
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Ok, last time I tried using the ODB-Enet cable in ISTA/P it didn't see the car, but that was a while ago. I'll try again and see if it works. Thanks!
|
|||
|
|
|
07-08-2015, 12:35 PM,
Post: #13
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Update NBT/Kombi by 0x63 with eNet only,
icom will use 0x10&0x63 then fail.... |
|||
|
|
|
07-08-2015, 13:42 PM,
Post: #14
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Is this only for nbt? I programmet cic and kombi successfully over icom
|
|||
|
|
|
07-08-2015, 17:32 PM,
Post: #15
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Only ENET works
|
|||
|
|
|
07-08-2015, 18:00 PM,
Post: #16
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Did you not read my post? i said i successfully programmed HU\RAD and KOMBI over ICOM without trouble with ISTA 3.56.1
|
|||
|
|
|
08-08-2015, 03:20 AM,
(This post was last modified: 08-08-2015, 03:21 AM by jeroenbmw.)
Post: #17
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Hi,
Its a bug in Ista-P 3.56 Kombi went all fine by me only NBT will not programm, it only programm bootloader and it try start programming 1% after that the error NotExecutable  Flash with esys the modules ista-P cannot flash than there is not a problem I think in next release it will be solved. (07-08-2015, 18:00 PM)SweetBMW Wrote: Did you not read my post? i said i successfully programmed HU\RAD and KOMBI over ICOM without trouble with ISTA 3.56.1 Yes my friend i know but from 3.56.2 and further there is this problem. |
|||
|
|
|
09-08-2015, 17:17 PM,
Post: #18
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
Did you use the latest ISTA/P? The latest one is 3.56.2.004, don't use the 003.
|
|||
|
|
|
06-09-2015, 22:43 PM,
Post: #19
|
|||
|
|||
|
RE: Programming KOMBI and NBT fails on F series
What does the DSS entry #43879 contains or what is the workaround for an Icom? (I only have an icom)
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
|
|
|
23-09-2015, 14:28 PM,
Post: #20
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
To last v3.56.4.003,this MOST couldn't be programming yet by ICOM A2.
ruben_17non: you said "use Router for DHCP IP for Icom.",it is right. hulahans: For your "the tool emulating a router"-dhcpsever,I tried according the "read me",but this tool couldn't fix this MOST error. I need your help,please see your pm.thanks a lot. I want program by WiFi rounter and ICOM A,please waiting for information. |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content
