[pietje001]

I've done a 2009 audi tt, but 2010 is facelift.. probably digiprog won't do it.. and it's not even listed in xtool..
and many audi's from 2010-2012 need to have eeprom prepared.

maybe someone else tried?

[ETPerformance]

Caddy 2013 - 2014 By OBD
Golf 6 Mutch 2011 By OBD
Kia Picunto 2006 By Chip
Kia Tucson 2004 By Chip
Aveo 2009 - 2010 - 2011 By Chip
Passat 2003 By OBD

[ETPerformance]

Chevrolet Aveo 2008 by Chip 93C56 OK
Peugeot 307 2006
BSI JC by chip 95128 OK
DASH JC by chip 95020 OK
DACIA LOGAN by chip 93C56 ok

Envoyé de mon ASUS_T00J en utilisant Tapatalk

[Antelito]

Hi,

i´m trying to change mileage on a Opel Combo C (2011). I use Digiprog 3 Vers. 4.94 and i tried the Opel Corsa Diagnostic OBD2 but it don´t work. So i guess i have to try it with Corsa 35080. Do i need anything else than the digiprog3 maschine and the cable (ST somewhat i guess)?

Has anyone done it on this cars before?

Thank you

[Dayo]

You do it via obd. It should bring up questions mark. When you type in the new mileage, as soon as you click the tick, hold the trip button down. Keep holding it till digi says check written value. Then release trip button. Remove battery negative for 10 secs then replace and new mileage should appear

[Antelito]

Ok, thanks so far.... i´ve tried it like you said but it didnt work... maybe i´ve made a mistake... i´ll try again...

do i understand it right, that there are 2 ways to change mileage on a opel corsa: first via diagnostic and second directly by manipulating the chip?

thanks...

[Dayo]

No, 35080 chip is on the corsa D

[pietje001]

Go to diag menu: AUTO - OPEL - CORSA - DIAG

give new mileage (don't press 'V' yet!)

press the button of the dashboard (trip meter) and hold button!

enter the new mileage (press 'V') (still hold dashboard button) wait until digiprog says ' check written value'

release dashboard button.

disconnect car battery for 30sec.

[Antelito]

Ok, i will try it today afternoon...

thanks so far

[Antelito]

It works! thank you again