[ROD-BENDERS]

Hello, need dtc off P2463 for ford fiesta edc17c10(I already do dpf off with swiftec but noe i get this error.

Sorry Racing this ecu is not supported by my soft

---

Hi
can someone do for this file O2 sensor off ??

Please

Sorry Dragosh this ecu is not supported by my soft.

---

Hello i need dtc off in Kia EDC16c39 p1186
Thanks

Here you go Juve18 P1186 x3 off

---

Please dpf off mondeo mk4 2007 2.0 tdci sid206, no volta and ecusafe
SW ver.: 7G91-12K532-PH
Spare: 7G91-12A650-UH
HW Ver.: 6G91-12B684-BA

Zimzia

Dpf Off

have a nice day

[ivaylomezdra]

Please help me i have peugeot 307 hdi 110 and fap error on panel please remove this error and fap filter remove my file is HERE

[juve18]

Hello. Pls help for DTC off P2453 Alfa EDC16C39
Thanks for help

---

Here is ur DPF OFF ivaylomezdra

[ROD-BENDERS]

Hello. Pls help for DTC off P2453 Alfa EDC16C39
Thanks for help

---

Here is ur DPF OFF ivaylomezdra

Juve here dtc P2453 x1 off dont forget to checksum

[panasonic1]

Hi please dtc off p2002 for mazda 6 denso rf7

[ROD-BENDERS]

Hi please dtc off p2002 for mazda 6 denso rf7

Here dpf off 4x dtc deleted.

before write, clear all dtc's and reset dpf value. write file. remove dpf core.

Please read instructions on image

two more version here

[vb23]

Hello Buzzard.

You have help me at the past and i need your skills again. I have one Peugeot 207 1.6HDI 110HP with Bosch EDC16c34 ECU and i have problem with the (Electric Power Steering / Esp coupling) the code of the problem is (U1313). I have change the Abs/Esp unit everything works fine the Esp light is off the engine light is off. I have see to the internet that fault codes when starts with U it means problem with Network Communication. It is possible to disable this error code? Also when i start the car, the light of steering whell turns on.

I have read the ecu with fgtech galletto v54 (china edition).

Really thank you!!

[ROD-BENDERS]

Hello Buzzard.

You have help me at the past and i need your skills again. I have one Peugeot 207 1.6HDI 110HP with Bosch EDC16c34 ECU and i have problem with the (Electric Power Steering / Esp coupling) the code of the problem is (U1313). I have change the Abs/Esp unit everything works fine the Esp light is off the engine light is off. I have see to the internet that fault codes when starts with U it means problem with Network Communication. It is possible to disable this error code? Also when i start the car, the light of steering whell turns on.

I have read the ecu with fgtech galletto v54 (china edition).

Really thank you!!

U1313 Vehicle speed transmitted by the ABS (CAN).

Hi Vb I cannot turn that dtc off its invisible to my software, and im not sure it would be a good idea anyway

Check wiring, particularly wheel speed sensors, because the abs and the speedo/steering all get their comms through them.

good luck

[brembo]

Hello ,
I have a Golf6_2.0TFSI_211PS

Error Code P0420

thx

[ROD-BENDERS]

Hello ,
I have a Golf6_2.0TFSI_211PS

Error Code P0420

thx

Whats the miles on the car brembo

Sent from my SM-N910F using Tapatalk