[ROD-BENDERS]

My soft supports ford edc16c34 ecu but your file is either bad read or altered

Sent from my SM-N910F using Tapatalk

[guciek]

Please check this dump

[ROD-BENDERS]

Please check this dump

same issue, file is either possibly modified beyond my software tolerance although MTX is very very good 100%.

[logauto]

Try of this file work 100% I test it with my car
mp pass
thanks

[patarouci]

Hi all world
plz FAP 407 2L HDI 136hp SID803

[ROD-BENDERS]

Hi all world
plz FAP 407 2L HDI 136hp SID803

dpf off

dont forget to checksum

[safi]

Hello
after immo off if you can disable dtc P1693
EDC17C08

Safi my DTC soft does not cover this ecu.
So I looked at doing new immo off file from your original files. Although my tools do a specific immo off for this cars ecu, with DTC's removed, your files show as incompatable.
The reasons for this could be a bad read, or modifications made to the file like tuning or switches being removed who knows ?

I was able to do two new files using the EDC17 "generic" immo off method and they are slightly different to the files you are using now.

I must mention that it is so important to have clean original files when you do this work. If my two new files dont remove your DTC, then may I suggest that you ask good members Mike Service or Steich, to see if they will go manually through your file to remove the DTC.

No pass for this Safi, good luck

and when I want to write the second file int_flash he asks the cks is not supported with my tool
if you can calculated the cks advance thank you for all that you already given my thank you

[carbon]

All DTC deleted in your C MAX.
Give us your ori file or post your ecu 0281 xxx xxx number for finding ori file.

---

Please check this dump

Sory too fast chek your file.
Here for you your dtc disabled , but almost all dtc its deleted.

[ROD-BENDERS]

Hello
after immo off if you can disable dtc P1693
EDC17C08

Safi my DTC soft does not cover this ecu.
So I looked at doing new immo off file from your original files. Although my tools do a specific immo off for this cars ecu, with DTC's removed, your files show as incompatable.
The reasons for this could be a bad read, or modifications made to the file like tuning or switches being removed who knows ?

I was able to do two new files using the EDC17 "generic" immo off method and they are slightly different to the files you are using now.

I must mention that it is so important to have clean original files when you do this work. If my two new files dont remove your DTC, then may I suggest that you ask good members Mike Service or Steich, to see if they will go manually through your file to remove the DTC.

No pass for this Safi, good luck

and when I want to write the second file int_flash he asks the cks is not supported with my tool
if you can calculated the cks advance thank you for all that you already given my thank you

Safi the files say csok which means checksum ok.

to re check the files I would need your original file which I dont have.

[mactom]

Please help me . Car is peugeot 407 1.6hdi 2006 year . I need egr off and dtc P1645.