[jozoku1]

Hi everyone.
Yesterday someone drove a car to my place so I could fix it. The car won't start. The car is connected on 24V from a truck. They suspected the ECU was broken and they replaced it. The old ECU is cloned into new ECU (not by me). I have both ECUs here and BDM files are the same in both.
The both ECUs are EDC16U1.
VCDS is communicates with ECU and it shows no errors.
The BDM file is in the attachment. Can someone check it?
There are no errors, the car just won't start.
BR

[sandor1987]

Are all the fuses good?

[jozoku1]

All fuses good. All relays good.

[vlaki electric]

Bro your file it seems good. i make for you immo off for test to see is he start without immo.flash is good. try and post results.

[jozoku1]

Nop.
After flash eeprom file with immo off car won't start..
Tnx m8.
Car runs on bremscleaner (when I spray it in the inlet manyfold).
Does anyone know how much pressure does the tank pump make?
It works but I don't know how strong it is.
BR

[jozoku1]

The file is good. The old ECU was broken. Spare ECU is from TDI engine. Not compatible.
I've found new ECU from SDI engine. Everything works.
Tnx
BR