Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-P 3.60 error 94201 63014 technical service initialization failed
|
23-01-2018, 11:42 AM,
Post: #21
|
|||
|
|||
|
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
This is a totally different error
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
23-01-2018, 12:24 PM,
Post: #22
|
|||
|
|||
|
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
But you can try...
|
|||
|
|
|
07-03-2018, 12:38 PM,
Post: #23
|
|||
|
|||
|
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
I have same problem. I can use last firmware but not support F series programming. Same software same firmware different icom A2 try succesed programming. in my opinion not support processor.
|
|||
|
|
|
18-09-2018, 06:45 AM,
Post: #24
|
|||
|
|||
|
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
I have same error and have tried all the suggestions and linked suggestions. Is there anything new to try? ISTA+ tells me I need to update software using ISTA/P but I thought ISTA+ was supposed to do that. That is following a NOX sensor fault on a 328d.
|
|||
|
|
|
23-10-2018, 01:33 AM,
Post: #25
|
|||
|
|||
|
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
has someone solved this problem?
|
|||
|
|
|
29-10-2018, 09:44 AM,
Post: #26
|
|||
|
|||
|
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
The problem is the ICOM it self, I have 2 of them, the first one which I failed to upgrade the firmware works with ISTA-p without any error, when I connect the ICOM with updated firmware it will give the same error and faults like everyone here, that mean new firmware in ICOM will not work with ISTA-P 3.60.
Hope I'm reight |
|||
|
|
|
26-01-2019, 07:24 AM,
Post: #27
|
|||
|
|||
RE: ISTA-P 3.60 error 94201 63014 technical service initialization failed
(29-10-2018, 09:44 AM)zaweel Wrote: The problem is the ICOM it self, I have 2 of them, the first one which I failed to upgrade the firmware works with ISTA-p without any error, when I connect the ICOM with updated firmware it will give the same error and faults like everyone here, that mean new firmware in ICOM will not work with ISTA-P 3.60. I am almost sure (maybe not in your case) that the problem is not in icom is not in the installation ista files, only the problem is zgw connect whatever you want and you will not program it anyway, why? because zgw does not give a connection check zgw in tool32 and You can see that programming is not active, or inpa ability to wakeup is OFF  Sorry, translator wrote If it my post is helpful, please push rep and press thanks to me . . . |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
BMW Service history by VIN | bmt_hr | 6,199 | 513,607 |
2 hours ago Last Post: da.2022 |
|
|
ISTA SQLiteDBs PL Polish 4.40.12 - 4.40.40 | maksymw | 4 | 1,027 |
2 hours ago Last Post: PstraG |
|
|
BMW EOS tester (IMIB) call-up error | fatfash | 7 | 248 |
Yesterday, 18:13 PM Last Post: fatfash |
|
|
Ediabas 7.6.0 for ISTA 4.46 | dfb | 3 | 663 |
Yesterday, 15:08 PM Last Post: flterence |
|
|
ISTA 4.28.22 activated Link or torrent | m-power | 1 | 132 |
10-05-2024, 13:16 PM Last Post: luohongzhi |
|
|
ISTA Czech Database ( 4.42.XX - 4.47.XX) | inspi1981 | 66 | 8,129 |
10-05-2024, 11:03 AM Last Post: inspi1981 |
| Error SIG_CHECK_FAILURE | Jalami | 16 | 1,934 |
10-05-2024, 07:39 AM Last Post: grizzle |
|
| BMW E83 A1 error - MRS: No message from DSC ... | ivanp | 38 | 1,539 |
09-05-2024, 10:13 AM Last Post: Node |
|
|
|
ISTA 4.46.xx problems and possible solution | Sedoy | 101 | 13,145 |
09-05-2024, 08:20 AM Last Post: NeRkO20 |
|
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,722 | 679,352 |
08-05-2024, 21:18 PM Last Post: Sedoy |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
