[Ratatouille98]

It works !

I had to write the certificat "sigs.der" & "fscs.der" AFTER import FSC. Now it works !

Thanks for this Tool !

[Arch30n]

It works !

I had to write the certificat "sigs.der" & "fscs.der" AFTER import FSC. Now it works !

Thanks for this Tool !

Where do you write the 2 files ? with ftp or a specific tool ? do you rename them ?
Cause i've already copy this files into my CIC with no success, the intel123's pdf is not very clear about that.
Can you be a little more explicit about the solution ?

Thank you

[Arch30n]

Hi,
I've tried writing certificates with DrGINI (B014) with my K+DCAN USB Cable but i'm always blocked. No vocal nav instructions and no voice control.

So I have re-done everything from zero : "virginized" CIC, importing SIG, FSCS and FSC (17,19 and 1B) with FStool. All are accepted.
I even tried replacing via ftp the files fcert.swt and scert.swt that had remained original into the CIC, with those provided (cert.der and fscs.der) in the patch.

Result is the same

I remember that the first time after applying the patch i've imported 9B FSC by mistake, could this have deleted the EU voice (French) ?

I don't have a ICOM so i cannot restore the unit.

Did i forget a step ? Can anybody help me ? thx

[patrutalex]

Hello i need for fsc cers bmw x5 e70
Wbazw61090L564829

[sameur10]

Hi,
I've tried writing certificates with DrGINI (B014) with my K+DCAN USB Cable but i'm always blocked. No vocal nav instructions and no voice control.

So I have re-done everything from zero : "virginized" CIC, importing SIG, FSCS and FSC (17,19 and 1B) with FStool. All are accepted.
I even tried replacing via ftp the files fcert.swt and scert.swt that had remained original into the CIC, with those provided (cert.der and fscs.der) in the patch.

Result is the same

I remember that the first time after applying the patch i've imported 9B FSC by mistake, could this have deleted the EU voice (French) ?

I don't have a ICOM so i cannot restore the unit.

Did i forget a step ? Can anybody help me ? thx

I think your problem is the way that you removed the script try replace this file via FTP

[rus-bmw]

I think your problem is the way that you removed the script try replace this file via FTP

Or reprogramm your CIC

[Arch30n]

Hi,
I've tried writing certificates with DrGINI (B014) with my K+DCAN USB Cable but i'm always blocked. No vocal nav instructions and no voice control.

So I have re-done everything from zero : "virginized" CIC, importing SIG, FSCS and FSC (17,19 and 1B) with FStool. All are accepted.
I even tried replacing via ftp the files fcert.swt and scert.swt that had remained original into the CIC, with those provided (cert.der and fscs.der) in the patch.

Result is the same

I remember that the first time after applying the patch i've imported 9B FSC by mistake, could this have deleted the EU voice (French) ?

I don't have a ICOM so i cannot restore the unit.

Did i forget a step ? Can anybody help me ? thx

I think your problem is the way that you removed the script try replace this file via FTP

Hi, i've solved the problem by restoring my original boot script, the 1st time i've only deleted the line who calls enable_fsc.sh. Perhaps a bad encoding EOF ???
Furthermore i've rebooted my CIC with Tool32 instead of doing a hard reset with the powerbutton, maybe it helps...?

Thanks for your help !

[Pl@y3R]

Hi, the patcher worked for my retrofitted CIC,(Red screen, restart), Navi is not greyed because is activated with script.I have one question: before load certs and fscs,should i delete manually the script? Thanks

[Arch30n]

Hi, the patcher worked for my retrofitted CIC,(Red screen, restart), Navi is not greyed because is activated with script.I have one question: before load certs and fscs,should i delete manually the script? Thanks

Yes, connect your CIC with ftp and you can replace the startl6sss.sh with the one provided by "sameur10", or restoring your original file(if you have a backup), then remove "enable_fsh.sh".

[Pl@y3R]

Hi, the patcher worked for my retrofitted CIC,(Red screen, restart), Navi is not greyed because is activated with script.I have one question: before load certs and fscs,should i delete manually the script? Thanks

Yes, connect your CIC with ftp and you can replace the startl6sss.sh with the one provided by "sameur10", or restoring your original file(if you have a backup), then remove "enable_fsh.sh".

Thanks for your reply, i'll gonna do this later after work