[Carpediem]

You have the rmc version, not the 3GP. You need navigation on sd card dont know if theres already a solution.

Hello, I found already solution... But there is problem, you should have old SD card reader. I tried SD card readers in many notebooks, but only one works - on Lenovo ThinkPad X1 (oldest one). Pls check my post:
Try http://gpsunderground.com/forum/audi/226...ution.html
I already have 2014 maps, but first - you should try to put the card into some card readers and write there any file. If does it work, you are ready for rewrite new map and I can send you newest map. Only solution is overwrite old map with new one on same card. Regards

Great work! But why you don't need to activate? Have you updated the firmware of the rmc? i will try it if it's safe in my A1

You first updated from 2011 to 2013 and nog from 2013 to 2014??

Hello, no, simple you don't need to activate maps. There is only activated SD card. There is a hidden partition not readable in normal card reader (i read on internet, that this is Garmin copy protection) and card reader in car only check, if there is good and activated card, no mpas. I have to check type of SD card reader. Second problem is, that writing to this card take aprox 6-12 hours.

Please share your 2014 maps here 2014 is working in your A6?

---

Ello there!!

I got problems with activating the map.

Car: A4 B8
Unit: 3G Plus (no SIM); 9498; 8R1 035 664 B
Sw: K0767 8R0906961DH
Map: 6.17.3 8R0060884BK
Used activator: SERGEYNIK, Carson

I've tried every possibility and still after few minutes I got message: Maps are not activated
I done:
Option #1 SERGEYNIK Patch (2 time map install)
0. Formatted nav partition.
1. Installed maps 6.17.3 from torrent
2. Replaced metainfo2 and VW folder on map SD card. Metainfo2 from http://www.sergeynik.com/mmi/metainfo2.rar
3. Installed once more map (it changed only few files)
4. Reboot and wait 2 minutes
5. Put on second sd card files and folders on root of sd from MMI3GApp_path_change.rar from http://www.sergeynik.com/mmi/MMI3GApp_path_change.rar
6. Put into folder SERGEYNIK/efs-persist/ one file - MMI3GApplication
7. Insert sd to unit, wait to start script, press key then wait till script finish then press key.
8. Reboot
9. Wait 2 minutes in navigation window - Map is not activated. FAIL

Option #2 Carson Patch (2 time map install)
1. Same till 6.
2. Put on another sd card files and folders from DG767_Patch.rar to root of sd card.
3. Insert sd to unit, wait to start script, press key then wait till script finish then press key.
4. Reboot (black screen bit longer then normally)
5. Wait 2 minutes in navigation window - Map is not activated. FAIL

Option #3 SERGEYNIK Patch (1 time map install)
0. Formatted nav partition.
2. Replaced metainfo2 and VW folder on map SD card. Metainfo2 from http://www.sergeynik.com/mmi/metainfo2.rar
3. Installed maps 6.17.3 from SD with changed metainfos files. (only VW - NOK)
4. Reboot and wait 2 minutes
5. Put on second sd card files and folders on root of sd from MMI3GApp_path_change.rar from http://www.sergeynik.com/mmi/MMI3GApp_path_change.rar
6. Put into folder SERGEYNIK/efs-persist/ one file - MMI3GApplication from MMI3GAppMMI3gp_961dh_K0767.rar
7. Insert sd to unit, wait to start script, press key then wait till script finish then press key.
8. Reboot
9. Wait 2 minutes in navigation window - Map is not activated. FAIL

Option #4 Carson Patch (1 time map install)
0. Formatted nav partition.
2. Replaced metainfo2 and VW folder on map SD card. Metainfo2 from http://www.sergeynik.com/mmi/metainfo2.rar
3. Installed maps 6.17.3 from SD with changed metainfos files. (only VW - NOK)
4. Reboot and wait 2 minutes
5. Put on another sd card files and folders from DG767_Patch.rar to root of sd card.
6. Insert sd to unit, wait to start script, press key then wait till script finish then press key.
7. Reboot (black screen bit longer then normally)
8. Wait 2 minutes in navigation window - Map is not activated. FAIL

By now ive downgraded to 5.15.5 and no activation also !!
Before whole upgrading i got 5.15.3 and K0612 software.

Im think that is something wrong with FSC keys files. (In engeneering menu keys 00040007, 00040405 and all other got info legal)
Can anyone help me with that ? I will deliver any info you need.

Install original map, without changes. After that activate with the carson patch, in thus thread there is a tuto from me, you can see how the folder structure from the activation looks like, copy the folders on the root of the sd. FSC is with the 7 on the end only in the FSC folder. Succes!

[jach0o]

Install original map, without changes. After that activate with the carson patch, in thus thread there is a tuto from me, you can see how the folder structure from the activation looks like, copy the folders on the root of the sd. FSC is with the 7 on the end only in the FSC folder. Succes!

Many thanks it worked, by now at least. Need to test on road.
Next thing is to remove errors. I got 3 of them left:

Code:

Wednesday,06,August,2014,15:39:42:65067
VCDS Version: Release 12.12.2

                Address 5F: Information Electr.       Labels: 4E0-035-6xx-5F.clb
Control Module Part Number: 8R1 035 664 E    HW: 8R1 035 664 B
  Component and/or Version: H-BN-NA       H43 0793
           Software Coding: 0F010000000681FD01004B4E00004403F00000030000000000
            Work Shop Code: WSC 02391 823 56573
                      VCID: 3874FCEB8BADA0DE637-806D
3 Faults Found:

03175 - Invalid Data Set
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:05

             Freeze Frame:
                    Voltage: 11.60 V

03389 - Data Set Implausible
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:05

             Freeze Frame:
                    Voltage: 11.70 V
                    Bin. Bits:      010

02612 - Audio Wire Adapter Set
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:14

             Freeze Frame:
                    Voltage: 11.60 V

Ive made what #benyclaudiu said over here, but after moving every value in caroperations (under green menu), before or after reboot i cant erase these errors. Any idea what am i doing wrong ??

There's another thing (VIN is not transmitted). Should i use VINPatcher 1.0.0.6 ? Is the Vinpatcher compatibile with 3gp units? How to use it ?

[daMassa]

I successfully updated my friends Audi A4 MMI 3G basic. Thanks to benyclaudiu for help with software names, and FandaTDI for help with update installation steps and error removing

After update, there was some errors. I fixed "Please Check Software Version Management" error with known VCDS method "Module 5F - Information Electr. > Adaptation - 10 > Channel 15", and recalculate Count (put Count value in calculator and do Xor 51666, then put that result in New value, test and save.)

There is slightly different method with "Invalid data set" error. I solved it like FandaTDI mentioned before. This method is working on my friends A4 and MMI 3G basic. Maybe it's working on other MMI's too. You need to try and let us know!
So it goes like this: I added +1 on every single value in green menu car/carmenuoperation and then did 3-button MMI restart. Then I cleared all faults in module 5F Information electr. and the error was gone! After that I set the values in car/carmenuoperation back to original values (-1 on every value), and again 3-button reset! After all of that I scanned whole car for faults, and there wasn't any faults on car.

Hope it helps

[ooodddiii]

Morning,

vinpatcher is not ok to set the Vin number. Sorry

[Carpediem]

Morning,

vinpatcher is not ok to set the Vin number. Sorry

Why not? It is working!

---

Install original map, without changes. After that activate with the carson patch, in thus thread there is a tuto from me, you can see how the folder structure from the activation looks like, copy the folders on the root of the sd. FSC is with the 7 on the end only in the FSC folder. Succes!

Many thanks it worked, by now at least. Need to test on road.
Next thing is to remove errors. I got 3 of them left:

Code:

Wednesday,06,August,2014,15:39:42:65067
VCDS Version: Release 12.12.2

                Address 5F: Information Electr.       Labels: 4E0-035-6xx-5F.clb
Control Module Part Number: 8R1 035 664 E    HW: 8R1 035 664 B
  Component and/or Version: H-BN-NA       H43 0793
           Software Coding: 0F010000000681FD01004B4E00004403F00000030000000000
            Work Shop Code: WSC 02391 823 56573
                      VCID: 3874FCEB8BADA0DE637-806D
3 Faults Found:

03175 - Invalid Data Set
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:05

             Freeze Frame:
                    Voltage: 11.60 V

03389 - Data Set Implausible
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:05

             Freeze Frame:
                    Voltage: 11.70 V
                    Bin. Bits:      010

02612 - Audio Wire Adapter Set
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:14

             Freeze Frame:
                    Voltage: 11.60 V

Ive made what #benyclaudiu said over here, but after moving every value in caroperations (under green menu), before or after reboot i cant erase these errors. Any idea what am i doing wrong ??

There's another thing (VIN is not transmitted). Should i use VINPatcher 1.0.0.6 ? Is the Vinpatcher compatibile with 3gp units? How to use it ?

You can erase last fault, in hidden menu dont change any value, only mke and reboot. Vin patcher makes the right vin in the mmi (only visual)

[ooodddiii]

I have done excatly what is in the help.

1/ generate SD (with option dump)

2/ Execute on the car.

3/ Modifiy the VIN with vinpatcher(a message say that is is ok)

4/ generate SD(with option create)

5/ Execute on the car.

VIN is always empty!!!

[Carpediem]

I have done excatly what is in the help.

1/ generate SD (with option dump)

2/ Execute on the car.

3/ Modifiy the VIN with vinpatcher(a message say that is is ok)

4/ generate SD(with option create)

5/ Execute on the car.

VIN is always empty!!!

Reboot mmi after execute on the car?

[ooodddiii]

Yes!! so I do not understand why VIN is empty.

Can you confirm that the steps I have done is good?

---

I have create a post for that.

here

http://garage-automotive.com/showthread.php?tid=5635

[mimmo-dj]

Hello,
I'm sorry to bother you ..
could you give me a hand?
my MMI has this software :
Release: P0022
MU: 0047
HNav_EU_P0022_D1
Version of the database navigator:
8R0060884E_ECE 5.8.5
what kind of MMI is mine?is a 3g HDD or 3g plus?
There are SD slot 1-2
DVD player
AMI connection in the glove box
Joystick above the knob
Where can I find a collection of all the firmware for my MMI?
thank you

[jach0o]

I have done excatly what is in the help.

1/ generate SD (with option dump)

2/ Execute on the car.

3/ Modifiy the VIN with vinpatcher(a message say that is is ok)

4/ generate SD(with option create)

5/ Execute on the car.

VIN is always empty!!!

Reboot mmi after execute on the car?

I done all what you said but it appears that its something wrong with framework, cuz i got message when open VINPatcher (doesn't matter is it 1.0.0.6 or 1.0.0.3):

Code:

Zamiast tego okna dialogowego znajdują się na końcu tego komunikatu.

************** Tekst wyjątku **************
System.NullReferenceException: Odwołanie do obiektu nie zostało ustawione na wystąpienie obiektu.
   w System.Windows.Forms.TextBoxBase.AppendText(String text)
   w System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
   w System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   w System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   w System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   w System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
   w System.Windows.Forms.Control.InvokeMarshaledCallbacks()




************** Zestawy załadowane **************
mscorlib
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18444 built by: FX451RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
VINPatcher
    Wersja zestawu: 1.0.0.6
    Wersja Win32: 1.0.0.6
    CodeBase: file:///C:/Users/JaCh0o/Desktop/VINPatcher1.0.0.6/VINPatcher.exe
----------------------------------------
System.Windows.Forms
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
mscorlib.resources
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_pl_b77a5c561934e089/mscorlib.resources.dll
----------------------------------------
System.Windows.Forms.resources
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_pl_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------


************** Debugowanie w trybie JIT **************
Aby włączyć debugowanie w trybie just in time (JIT), plik .config tej
aplikacji lub komputera (machine.config) musi mieć
wartość jitDebugging ustawioną w sekcji system.windows.forms.
Aplikacja musi być również skompilowana z włączonym
debugowaniem.


Na przykład:


<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>


Gdy debugowanie JIT jest włączone, wszystkie nieobsługiwane wyjątki
są wysyłane do debugera JIT zarejestrowanego na komputerze
i nie są obsługiwane w tym oknie dialogowym.

When im trying to create Dump SD i got blank text window with ok button. On card i got only:
run.sh, copie_scr.sh, utils and screens is it ok ? YES IT IS.


After dumping texts.jar when i click patch on Dump SD\original\texts.jar in application i got message (same when i take texts.jar on desktop or anywhere else):

Code:

Szczegółowe informacje na temat wywoływania debugowania w trybie JIT (just in time)zamiast tego okna dialogowego znajdują się na końcu tego komunikatu.


************** Tekst wyjątku **************
System.NullReferenceException: Odwołanie do obiektu nie zostało ustawione na wystąpienie obiektu.
   w System.Windows.Forms.TextBoxBase.AppendText(String text)
   w WindowsFormsApplication1.Form1.button2_Click(Object sender, EventArgs e)
   w System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   w System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   w System.Windows.Forms.Control.WndProc(Message& m)
   w System.Windows.Forms.ButtonBase.WndProc(Message& m)
   w System.Windows.Forms.Button.WndProc(Message& m)
   w System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)




************** Zestawy załadowane **************
mscorlib
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18444 built by: FX451RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
VINPatcher
    Wersja zestawu: 1.0.0.6
    Wersja Win32: 1.0.0.6
    CodeBase: file:///C:/Users/JaCh0o/Desktop/VINPatcher1.0.0.6/VINPatcher.exe
----------------------------------------
System.Windows.Forms
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
mscorlib.resources
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_pl_b77a5c561934e089/mscorlib.resources.dll
----------------------------------------
System.Windows.Forms.resources
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.resources/v4.0_4.0.0.0_pl_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
SharpCompress
    Wersja zestawu: 0.10.3.0
    Wersja Win32: 0.10.3.0
    CodeBase: file:///C:/Users/JaCh0o/Desktop/VINPatcher1.0.0.6/SharpCompress.DLL
----------------------------------------
System.Core
    Wersja zestawu: 4.0.0.0
    Wersja Win32: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------


************** Debugowanie w trybie JIT **************
Aby włączyć debugowanie w trybie just in time (JIT), plik .config tej
aplikacji lub komputera (machine.config) musi mieć
wartość jitDebugging ustawioną w sekcji system.windows.forms.
Aplikacja musi być również skompilowana z włączonym
debugowaniem.


Na przykład:


<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>


Gdy debugowanie JIT jest włączone, wszystkie nieobsługiwane wyjątki
są wysyłane do debugera JIT zarejestrowanego na komputerze
i nie są obsługiwane w tym oknie dialogowym.

And nothing happens with file. after puting it into slot card still: VIN has not been transmitted yet. Can i ask someone to convert my texts.jar ??

---

I successfully updated my friends Audi A4 MMI 3G basic. Thanks to benyclaudiu for help with software names, and FandaTDI for help with update installation steps and error removing

After update, there was some errors. I fixed "Please Check Software Version Management" error with known VCDS method "Module 5F - Information Electr. > Adaptation - 10 > Channel 15", and recalculate Count (put Count value in calculator and do Xor 51666, then put that result in New value, test and save.)

What does mean Xor 51666 ? I made it by calculator on audiethusiast, and after ths error SVM disapeared but still there are these codes:

Code:

Wednesday,06,August,2014,15:39:42:65067
VCDS Version: Release 12.12.2


                Address 5F: Information Electr.       Labels: 4E0-035-6xx-5F.clb
Control Module Part Number: 8R1 035 664 E    HW: 8R1 035 664 B
  Component and/or Version: H-BN-NA       H43 0793
           Software Coding: 0F010000000681FD01004B4E00004403F00000030000000000
            Work Shop Code: WSC 02391 823 56573
                      VCID: 3874FCEB8BADA0DE637-806D
3 Faults Found:


03175 - Invalid Data Set
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:05


             Freeze Frame:
                    Voltage: 11.60 V


03389 - Data Set Implausible
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:05


             Freeze Frame:
                    Voltage: 11.70 V
                    Bin. Bits:      010


02612 - Audio Wire Adapter Set
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 217
                    Mileage: 118310 km
                    Time Indication: 0
                    Date: 2014.08.06
                    Time: 15:29:14


             Freeze Frame:
                    Voltage: 11.60 V

There is slightly different method with "Invalid data set" error. I solved it like FandaTDI mentioned before. This method is working on my friends A4 and MMI 3G basic. Maybe it's working on other MMI's too. You need to try and let us know!
So it goes like this: I added +1 on every single value in green menu car/carmenuoperation and then did 3-button MMI restart. Then I cleared all faults in module 5F Information electr. and the error was gone! After that I set the values in car/carmenuoperation back to original values (-1 on every value), and again 3-button reset! After all of that I scanned whole car for faults, and there wasn't any faults on car.

Hope it helps

Tried that and after changing values to +1 and reboot can't remove errors...