[dil6222]

If I have already read a bomb and I get the pin

I have two pins for the car and the one for the new pump, which it refers to

once programmed it keeps coming out the same pin of the pump

Don't forget to program vin as well pump is programming incorrectly and not keeping pin
All I can suggest is reset all units then reprogram I'll try make you a complete guide.
Aslong as you reset pump with the pin it came with and then using the pin that matches all other units when programming should be correct.
The only thing is if its incorrectly synced it won't work hence why I suggest full reset

Go on immo then measuring blocks and check the blocks for key post screen here also scan all units and screenshot any faults here.

Are you from UK?

[manueldord]

I am from Spain

have if you can give me a guide step by step to start this zafira thank you and greetings and happy new year

[dil6222]

I am from Spain

have if you can give me a guide step by step to start this zafira thank you and greetings and happy new year

Hello again try

Reset ecu with original pin
Reset immo with original pin
Reset pump with pin that came with it
1.
Under the programming menu on either ecu or immo there is drop down box there should be the option ecm and immo replaced. First enter original pin then programming options select ecm and immo replaced then program.

2.
now find option for pump programming under ecu or immo programming can't remember which and program pump using original pin not the pin it came with.

3 cycle ignition do not try to start read and clear faultcodes from all units now try to start if not start rescan and post faultcodes here

Hope this helps I don't have zafira to work on right now otherwise would have tested it myself