[immokill]

Hello need please help  
 Mercedes W211 E420CDI  ecu EDC16CP36  
Car has blocked EGR s  ,intake runner is disconected  and dpf is out .Car is in limp mode  3000rpm

I dont know if this is original map i read on bench .

need DPF OFF , EGR s  off , SWIRL FLAPS motor off ,  need all off because egrs are blocked and sensors are not present for dpf.

I try some solution but it goes  1km until I stop and then limp mode is active  no rev 3000rpm

sw
1037375870
1037392600

Thanks

[mb055]

Only manual solution on this, i doubt any auto program to work

[immokill]

I try manual solution but didnt work from one tuner . Is it possible that no one can do it ? I will pay mates

[CenturionM]

I try manual solution but didnt work from one tuner . Is it possible that no one can do it ? I will pay mates

test and report



if there is a problem, also try with the DPF and EGR electronics disconnected

[immokill]

i tested solution of user and not work
is there any other solution ?

[CenturionM]

i tested solution of user and not work
is there any other solution ?

What's going on? what symptoms? what DTCs?

[immokill]

i TESTED 5 FILES , AND PAYED FOR THEM , 50-80 euros .
Car goes over 3000 rpm when start and when stop it limit revs to 3000rpm and does not go when driving over that limit until I restart engines . With some files not go over 3000rpm .never.

I think that solution is problem I will post here solutions maybe someone has any idea.
it is V8 It HAS 2 EGR BOTH ARE BLOCKED AND UNPLUGED BECAUSE THEY ARE RIP..
m55 is disconnected too , and dpf is out .

Regards

[CenturionM]

i TESTED 5 FILES , AND PAYED FOR THEM , 50-80 euros .
Car goes over 3000 rpm when start and when stop it limit revs to 3000rpm and does not go when driving over that limit until I restart engines . With some files not go over 3000rpm .never.

I think that solution is problem I will post here solutions maybe someone has any idea.
it is V8 It HAS 2 EGR BOTH ARE BLOCKED AND UNPLUGED BECAUSE THEY ARE RIP..
m55 is disconnected too , and dpf is out .

Regards

please DTC

[cniky]

You will find the password in PM.

[CenturionM]

i TESTED 5 FILES , AND PAYED FOR THEM , 50-80 euros .
Car goes over 3000 rpm when start and when stop it limit revs to 3000rpm and does not go when driving over that limit until I restart engines . With some files not go over 3000rpm .never.

I think that solution is problem I will post here solutions maybe someone has any idea.
it is V8 It HAS 2 EGR BOTH ARE BLOCKED AND UNPLUGED BECAUSE THEY ARE RIP..
m55 is disconnected too , and dpf is out .

Regards

try this corrected


same password