Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Please need flash firmware + eprm 95128 peugeot 407
|
24-03-2024, 08:24 AM,
(This post was last modified: 25-03-2024, 06:14 AM by raffy haddad.)
Post: #1
|
|||
|
|||
|
Please need flash firmware + eprm 95128 peugeot 407
Someone has original
flash firmware + eprm 95128 from BSI peugeot 407 96 640 590 8001 BSI04EV K04-00 141008 BOOT 28120836-4 V05.01 HARD 28119248-3 C 281201930C F04941455 Peugeot 407 2.0 ecu dcm3.5 2009 Thank you very much to all. |
|||
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
24-03-2024, 19:27 PM,
(This post was last modified: 24-03-2024, 19:32 PM by jeam.)
Post: #2
|
||||||||||
|
||||||||||
|
RE: Please need flash firmware + eprm 95128 peugeot 407
Problem solved. Program flash and eprom in the BSI. Program everything with the original pin code in the attached file. FIRMWARE ID 0F.F5 Read eprom 95320 from a DCM3.4 ENGINE ECU save an original copy, with any editor program NOT with "FF" You can now connect it to the vehicle. Program or telecode with diagbox. First change the smart box, VIN number of your vehicle, program keys and pair the ecu. The diagbox will ask you at the end of key programming if the engine ecu is new, say yes and code. The vehicle starts perfectly and everything comes back to life... Thank you very much to all.
| ||||||||||
