Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

DO NOT BUY or use Nissan Consult III+ chinese clone!
24-08-2015, 13:14 PM,
Post: #1
UNissan  DO NOT BUY or use Nissan Consult III+ chinese clone!
This is to warn everyone who decide to buy Chinese clone of NISSAN CONSULT III Plus tool.
I purchased the tool from this seller: http://www.auto-diagnostic-tool.com/por....104&id=261 which has caused several damage to the car while the tool was connected - ECM and BCM modules died
I have to add that I used to work with genuine Nissan Consult III Plus software quite frequently so it's not caused by lack of knowledge!!!


Chinese clone also did not work as genuine NISSAN tool. It could not detect car VIN, communication was dropping most of the time, etc. etc...


Stay away of Chinese crap if you like your car..
Quote this message in a reply
[+] 4 users say Thank You to duncho for this post
24-08-2015, 16:27 PM,
Post: #2
RE: DO NOT BUY or use Nissan Consult III+ chinese clone!
It depends of how much you buy,me personal have not this VCI but I know ppl's who are using clone VCI and have no problem,so not generalize+not think I'm not an chinese market fan but maybe you chose to buy a cheap version or simply you have bad luck
Quote this message in a reply
[+] 12 users say Thank You to coriducu for this post
15-07-2016, 05:27 AM,
Post: #3
RE: DO NOT BUY or use Nissan Consult III+ chinese clone!
The clone C3+ is expensive in China. But it not same as original C3+ at all, Only has the same cover. It can't support several function of C3+ etc. reprogramming.
Quote this message in a reply
15-07-2016, 08:24 AM,
Post: #4
RE: DO NOT BUY or use Nissan Consult III+ chinese clone!
Chinese crap allows to scan and clear errors, and the best case scenario to change some settings. But it cannot handling monitoring functions i.e. you set to monitor ECM but after a while, it dropps connection to OBDII and laptop and the only thing you can do is to kill Consult app and reconnect VCI from OBDII and the laptop. In general, it is very unstable device, which if get disconnected in crucial moment, will damage some ICU.

It is fraud to sell this chinese crap for such high amount, when better job can do full version of Xpro3 with hacked EasyDiag OBD scanner (which support all makes on the globe). The other thing is that the seller is lying & cheating. They didn't want to accept item return and when they connected remotely to my laptop, didn't even have basic knowledge of how to using it. They only managed to check whether VI2 driver was installed properly.
I don't mind what you do with your money, I just wanted to warn innocent people who decide to spent their hardly earned money on this tool. BE AWARE OF THESE LIMITATIONS AND STAY AWAY OF FRAUDELENT PRACTICES OF AUTO-DIAGNOSTIC-TOOL.
Quote this message in a reply
[+] 4 users say Thank You to duncho for this post
15-07-2016, 10:37 AM,
Post: #5
RE: DO NOT BUY or use Nissan Consult III+ chinese clone!
Thank you for you opinion
the chine clone it is bad result
Quote this message in a reply
15-07-2016, 16:12 PM,
Post: #6
RE: DO NOT BUY or use Nissan Consult III+ chinese clone!
Yes. It has been a well known fact for years. If you want to use this tool then buy genuine new or used from usa.
Reputation: +1 - Balyanchic [+1]
Quote this message in a reply
[+] 2 users say Thank You to Diagnostix for this post
06-03-2017, 02:54 AM, (This post was last modified: 06-03-2017, 04:20 AM by Clusters.)
Post: #7
RE: DO NOT BUY or use Nissan Consult III+ chinese clone!
(15-07-2016, 16:12 PM)Diagnostix Wrote:  Yes. It has been a well known fact for years. If you want to use this tool then buy genuine new or used from usa.

I badically learned if i buy something from china dont expect warranty. Been burned a few times with other tools. As far as consult 3 goes i use my cardaqm j2534 and consult3 software minor changes and it workes no programming. I have only tried 3 cars. I think i got the software from hasoon2000 here or another forum not sure.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
UInfiniti Looking for Nissan Consult j2534 drovid 5 326 16-03-2024, 15:01 PM
Last Post: domelec
  Nissan Qashqai 2019 need cooding sorin.henea 1 87 04-03-2024, 09:05 AM
Last Post: xxmatixx
  2009 Nissan Sentra Calibration file koziol 0 36 26-02-2024, 16:35 PM
Last Post: koziol
  Nissan Qashqai no cummunicate with ecm , many fault u1000 TKservice 0 45 23-02-2024, 06:59 AM
Last Post: TKservice
UNissan Glow plugs values Nissan x-trail t32 dci bad start AlexM3F80 3 102 23-02-2024, 06:25 AM
Last Post: AlexM3F80
  nissan pickup 2005 new key davito1 0 23 22-02-2024, 17:08 PM
Last Post: davito1
  Nissan Consult III+, V75, Full install, Reprogramming database, Operation manual , Fr sazimam 17 4,664 08-02-2024, 19:26 PM
Last Post: drovid
UNissan Nissan Consult 3 plus V82.50.00 + Pplus V83 + europatch V42.1 predacon 5 1,939 08-02-2024, 19:23 PM
Last Post: drovid
UNissan Nissan Consult 3 + V226 Inc Programming Data simo2k 16 3,223 07-02-2024, 17:03 PM
Last Post: florinyes
  alinace iv chinese problem davito1 4 183 31-01-2024, 18:08 PM
Last Post: davito1

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content