[smlee747]

""""""""""Since i have seen that you have problems with fw upgrade and install that, uninstall that ..... and so on i have made a pack with DRIVERS VAS5054 for X86 and x64 and with D-PDU API versions 1.20.20 extracted from ODIS 2.2.2 and 1.20.23 extracted from ODIS 2.2.3. Also inside you will see a log with firmware updated on these levels on VAS to compare with yours.

Like this you don't have to install and clean windows and so on. Monitor with a program only one installation so that when you are done with it you can clean that and install the other.
Thanks to MrWolf that explained the procedure in an early post, here it is in detail

1. Connect VAS5054A to USB port and install Drivers
2. Install D-PDU API
3. Open Softing D-PDUAPI Test Application
4. Select PDU-API Version - here choose your installed version
5. Push Parse MDF File button
6. On Select MVCI Module - now if all OK you should see your VAS
7. Push PDUModuleConnect button
8. Look at your VAS head and you should see it blinking.
9. Wait for 30 sec or so and at the end if all OK you should have these lines:
""""""""""""""""


How to use, i dont understand what i do wrong.
1. klick exe driver to install...i do
2. how to do? Folder copy ??

Hi..
Maybe odis old version 2.0.0 or 2.0.1 ..good working.
But odis latest version not working..
My thinking is vas5054a qulity problem.
I bought new good qulity vas5054a. And good working...
VAS5054A chip is different.
I have never experienced such symptoms.