[Mwahab]

There is an F10 528i with VINV97355

A small workshop in here changed some suspensions parts on it, for regular maintenance as it exceeded 90k km.

The the local guy took out the shock abosrber and ' Fucked it' as the costumer said, he pushed and pulled it while it is removed from the car.

Then, then reinstalled the suspension, they found out the the car is ' poped-up' the distance between the tyre and fence is really height, you can put all of ur 5 fingers straight.
the local guy didn't know what to do of course, so they called me.

I found 2 errors in VDM and ICM stating that ' Signal is invalid'
tried to re calibrate the sensors ' Ride Height Adjustment' and measured the actual measurements, and calibration was done. still same height.

i tried to call up ECU functions, and check the pull and pressure on the dampers, i found it A 0.0 however the voltage was constant.


i wanna help that guy, i will be glad if u know how to re adjust the height, we want it to be down as always you know.

we compared 2 f10 cars with 18inch rims, and the diff in distance was terrible, and when driving, the car is like a swing.

Hope you have any clue.