Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Alpina D5 Gearbox Software
09-03-2018, 05:57 AM,
Post: #180
|
|||
|
|||
RE: Alpina D5 Gearbox Software
Hi guys,
I'd like to share my experiece with you for all of you who would like to also flash D5 sw on a 535xd LCI F10 or F11. I followed the instruction and changed the type code to XA71 (535d pre Lci F10) but SVT calculation breaks. So I used 5D71 for 535d LCI F11. If you have a F10 use 5D51 instead. There is a differenc in the HKFM module between F10 and F11. Since the 535d RWD LCI is using electrical power steering (EPS) and the xdrive does not, there was a little conflict: I only flashed EGS (blFlash, swDelpoy, cdDelpoy) and had VCM and MSN Update unchecked in E-SYS options. All seems to be fine. In ISTA+ I noticed that EPS has been added and does not responce (which is clear since it does not exist on Fxx xDrive models). The odd thing: I never wrote VO and ECU tree to VCM and also during falshing I disabled ECU tree update (Parameters tab on TAL processing). So I modified SVT_soll prior to calculate TAL. In SVT_Soll I clicked on EDIT and removed EPS. I ignored several errors during TAL calc. After that I was able to successfully flash D5 software on my 535xd F11 LCI and Sailing Mode is also working. I am wondering why the original sw takes 1 minute longer to be flashed than the D5 one. Is VTG able to handle the D5 software without problems?? Regards, Fishermans |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Return to TopReturn to Content