Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F30 6WA RETROFIT 160D0WT !!!
31-03-2018, 22:54 PM,
Post: #1
|
||||||||||
|
||||||||||
BMW F30 6WA RETROFIT 160D0WT !!!
IF SOMEONE KNOW HOW TO VIRGINIZE THE F30 CLUSTER THAT HAVE THE 160D0WT CHIP ON IT ! i have a big ask if someone can help resolvin my problem i have an bmw f30 2014 and i am doing an 6wa retrofit with used cluster i was search and read about make the cluster "virgin" before is get in the car so i flow some stepts found it on the internet but those are for the 160D0WQ chip with store the km and the vin on it , i want to tell that my used cluster is lower km that i actualy have stored in my car so i don't want to make it 0 km just to change the vin on it so the step are made for the 160D0WQ chip are : 2.2 Erasing VIN on the 160D0WQ 1. Start the programmer Software (supposing you did install it correctly with all drivers before) 2. On the Main Screen, click on "MCU" and select "160D/35160". Click "OK" (pic. 8) 3. Connect the SOIC Tesclip to the 160D0WQ-Chip. 4. Click "Read" : the EEPROM should be read. If not, check the testclip position and orientation. 5. Save the unmodified BIN and make a backup copy to a safe place 6. Now erase the VIN (a) Replace (not insert !!!) byte 70 0F (1 pair) with "FF" (longVIN) (b) Replace all bytes from 80 00 to 80 0F (the whole line) with"FF" (long VIN) © Replace bytes 590 0E and 590 0F (2 pairs) with "FF" (shortVIN) (d) Replace bytes 5A0 00 to 5A0 04 (5 pairs) with "FF" (shortVIN) Save the modified BIN (choose a new filename) (f) on the main screen, click on "WRITE". The modified BIN is now written to the EEPROM, and the data will be verified. (g) Read the EEPROM again and check the modified bytes to be sure everything is ok. BUT NOW THERE IS MY PROBLEM ON THE CLUSTER I HAVE THE CHIP INSIDE IS 160D0WT SO THE ADRESS THAT IS MENTION ABOVE ARE LITTLE BIT INCORECT .... SO someone cand guide me how to do it ? i will atach the in file read it with my original ORANGE5 programmer . thank you guys for the help and also please take the steps above if u have the 160D0WQ chip inside your cluster and you want to make it work for your car .
|