Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

OP-COM V5 Bricked
10-06-2019, 19:52 PM, (This post was last modified: 10-06-2019, 19:57 PM by mattydr67.)
Post: #8
RE: OP-COM V5 Bricked
Mate if you can see the firmware and your test it is OK in opcom then there is no corrupt firmware.
But if you can see the firmware and test OK then your MCU is blocked. This is the protection of this MCU used by Chinese in this time.
Don't waist your time. Change the MCU with and original programmed one and you will see that will works from the begining.
You can use any real firmware. Fw1.99 it is a fake one. Use fw1.39.
One more think. If you can test the interface and you can see the firmware version and test it is OK then you cannot have a corrupted firmware. You just have a blocked Chinese MCU.
Good luck
Reputation: +1 - dil6222 [+1]
Quote this message in a reply
[+] 2 users say Thank You to mattydr67 for this post


Messages In This Thread
OP-COM V5 Bricked - by Shooting - 10-06-2019, 15:58 PM
RE: OP-COM V5 Bricked - by dil6222 - 10-06-2019, 16:31 PM
RE: OP-COM V5 Bricked - by Shooting - 10-06-2019, 16:52 PM
RE: OP-COM V5 Bricked - by dil6222 - 10-06-2019, 22:08 PM
RE: OP-COM V5 Bricked - by mattydr67 - 10-06-2019, 17:22 PM
RE: OP-COM V5 Bricked - by Shooting - 10-06-2019, 18:23 PM
RE: OP-COM V5 Bricked - by mattydr67 - 10-06-2019, 19:25 PM
RE: OP-COM V5 Bricked - by Shooting - 10-06-2019, 19:32 PM
RE: OP-COM V5 Bricked - by mattydr67 - 10-06-2019, 19:52 PM

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content