[techmechanic]

Quick update! I remembered that I had another (and more complete) version of HDS from a while ago. I installed HDS 3.101.019 which was 4.65GB in size! It came with an application called HIMGMA.exe which apparently was created by TizWaz. I believe this allowed the version to detect the GNA600 and HIM.

So after installing, I ran it and connected it to my Element. I was able to select the HIM and it connected to the car. Once it identified the car as a 2008 Acura TL (remember i'm using the TL ECU) I was able to read the Honda Systems. Now it is showing IMMOBI, is able to connect to it and i'm able to do things like replace immobilizer, VSA, and other things.

I had to replace the VSA modulator in the Honda Element with one from the Acura TL because of the communication difference and also the yaw rate sensor module being different, it is functioning fine but is throwing a code for ECU Relation error. I was never able to get to "Replace VSA modulator" so it can pair it with the ECU. Now that I can get there, it is saying "Obtain PCM-code[IMMOBILIZER PCM CODE] from iN. The vehicle's VIN will be required to obtain the password" and then it shows a screen with a number entry screen.

Does anyone know if there are code calculators available that can provide these? Not asking to post software but perhaps a link to where I could learn more? Also, if anyone has questions about these various Honda systems or about the swap I would be happy to answer.