Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ No crank no start, Vauxhall insignia Petrol
|
06-05-2022, 18:12 PM,
Post: #9
|
|||
|
|||
|
RE: No crank no start, Vauxhall insignia Petrol
The Fuse F1UA (as you said the F1 enginebay) has B+ on one side and goes directly to the gearbox ecu "Connector X1 pin1" (which is mounted on top of the gearbox)
So if you pull the fuse and you have 0 Voltage on both Fuse-Pins, it would mean that there is B+ missing. Have you checked the BIG Fuses mounted on the battery? And just to be sure... is the Battery charged enough? Because the Technical Information says, that the BCM in this car has an undervolt check and will refuse zu turn on the bcm module etc. If it has more than about 11,6 V it should not matter. |
