[abagray]

Did you check for power across the fuses or just a visual check?

Is there power getting to the brake switch?

---

Did you check for power across the fuses or just a visual check?

Is there power getting to the brake switch?

You mean check all the relevant fuses while they are on place?
you mean remove the brake switch and check voltage across the contacts?
if there is no voltage across the switch, what does it mean?

Today I bought the whole light system including the sockel for 100$ from a second hand shop and changed the whole rear light system on both sides. I got very interesting results which is different from the old light system. In the old light system, I used to have a working DIRECTIONAL and REVERSING lights on both Left and Right sides.

In the new light sytem I got very strange results:

- the DIRECTIONAL LIGHT is working on both sides on the back.
- the BRAKE LIGHT on LEFT is ON always whether brake pedal ON or OFF
- BRAKE LIGHT is OFF always whether brake pedal ON or OFF
- REVERSE LIGHT is not working on LEFT side
- REVERSE LIGHT is working on RIGHT side
- DIM LIGHT is not working on LEFT side
- DIM LIGHT is not working on RIGTH side

I have attached the schematic for PEUGEOT PARTNER

---

I took out the fuses and checked resistance. All the fuses are fine.
you mean I remove the brake switch and then check if there is power on the contacts?
I dont have diagnose PP2000. Would pp2000 show errors for the brake light?

I don't have diagnose PP2000 yet. Would pp2000 show errors for the light sytems and brake light in particular?