Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM Next Clone won't connect to Esys
01-03-2023, 08:59 AM,
Post: #1
|
|||
|
|||
ICOM Next Clone won't connect to Esys
Hello team,
I am after some advice on a connection issue I'm having with a customer's 2016 BMW C650 Sport Scooter. He has a ICOM Next Clone and it connects fine in ISTA with IP 192.168.8.1. When I try to connect in Esys after running a fault scan in ISTA to open the port, it will not connect. I am using the correct IP the same from ISTA. I have tried locking the ICOM with itoolradar and it doesn't make any difference. I also tried ethernet and Dcan connection in Esys, no difference. It doesn't make sense to me that ISTA can read the bike fine with the ICOM but Esys will not read it. Any advice here? (I posted this in the general section rather than motorcycles as more experts will notice it here and respond) |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
ICOM Next Clone won't connect to Esys - by bennymx - 01-03-2023, 08:59 AM
RE: ICOM Next Clone won't connect to Esys - by Node - 01-03-2023, 09:06 AM
RE: ICOM Next Clone won't connect to Esys - by bennymx - 01-03-2023, 09:34 AM
RE: ICOM Next Clone won't connect to Esys - by Node - 01-03-2023, 09:47 AM
RE: ICOM Next Clone won't connect to Esys - by inspi1981 - 01-03-2023, 10:12 AM
RE: ICOM Next Clone won't connect to Esys - by Node - 01-03-2023, 10:13 AM
RE: ICOM Next Clone won't connect to Esys - by bennymx - 01-03-2023, 10:13 AM
RE: ICOM Next Clone won't connect to Esys - by Vojno - 01-03-2023, 13:30 PM
RE: ICOM Next Clone won't connect to Esys - by Edward1968 - 01-03-2023, 16:32 PM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content