Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM Next Clone won't connect to Esys
01-03-2023, 10:13 AM,
Post: #7
|
|||
|
|||
RE: ICOM Next Clone won't connect to Esys
Yes on one machine we did BLP only due to storage constraints. But on the other machine he had SDP, it would not calculate. I figured a corrupt install as I could not verify it was correct. It could be the ICOM as its a clone. I assumed if ISTA is happy with it, Esys should be also. I asked to test on a newer model of bike. But not available. Unfortunately, the ENET cable can't work as the bike is too old. Normally avoid these types of jobs remotely. Lots of hours gone into it for little result so far.
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
ICOM Next Clone won't connect to Esys - by bennymx - 01-03-2023, 08:59 AM
RE: ICOM Next Clone won't connect to Esys - by Node - 01-03-2023, 09:06 AM
RE: ICOM Next Clone won't connect to Esys - by bennymx - 01-03-2023, 09:34 AM
RE: ICOM Next Clone won't connect to Esys - by Node - 01-03-2023, 09:47 AM
RE: ICOM Next Clone won't connect to Esys - by inspi1981 - 01-03-2023, 10:12 AM
RE: ICOM Next Clone won't connect to Esys - by Node - 01-03-2023, 10:13 AM
RE: ICOM Next Clone won't connect to Esys - by bennymx - 01-03-2023, 10:13 AM
RE: ICOM Next Clone won't connect to Esys - by Vojno - 01-03-2023, 13:30 PM
RE: ICOM Next Clone won't connect to Esys - by Edward1968 - 01-03-2023, 16:32 PM
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content