[apol]

Ohhhh thx but to late ((( (maby in future when i know why cannot reprogram with testpoints)
ready soldered and asembled




now the question is why i canot read this eeprom by test point
directly on BSI without desolder this 2 pcb's?

i used to read up-2008 programmer when conected wires apps show me error that on wp-gnd pin3-4 and pin 7-8 are short

desoldered this 2 layers on bsi and removed eeprom soldered to socket and read works without problem
Is need to power up BSI before read? when conecting via wires?

btw
Tachosoft have corected type2 off BSI online with eeprom - 24c128 what is wrong again should be AT25128