[painsage]

UPDATE: On my unit, native ID6, 4gb RAM, GPS, DAB. After doing the OMAP method, i have a file created in the mentioned directory. The file is 0kb in size, and is empty when opened with notepad. This did NOT fix the no signal/black screen issue. HU was powered on 4 times, 2 of those i got no signal. Very,very unfortunate, meaning i have to go back to 18-03 and hope that a reflash will fix my screen mirroring issue.

No signal is a slightly different issue. Is your coding correct? For me, the ID3 screen is always black not in No Signal state without that file.

Post the output of these commands:

PHP Code:

on -f hu-jacinto -t 14 -r 41
on -f hu-jacinto -t 14 -r 42
on -f hu-jacinto -t 14 -r 43
on -f hu-jacinto -t 14 -r 44
on -f hu-jacinto -t 14 -r 45
on -f hu-jacinto -t 14 -r 46
on -f hu-jacinto -t 14 -r 47
on -f hu-jacinto -t 14 -r 48
on -f hu-jacinto -t 14 -r 49
on -f hu-jacinto -t 14 -r 4A
on -f hu-jacinto -t 14 -r 4B
on -f hu-jacinto -t 14 -r 4C
on -f hu-jacinto -t 14 -r 4E 


Also try running this a few times:

PHP Code:

on -f hu-jacinto apixconfig -t 14 -w 2F 01 


What CID are you using?

Coding is good for apix1, it worked on 18-03 no problem, no signal/blackscreen didn't happen at all. I am using NBT ID3 8.8inch CID
I'm gonna try these commands tomorrow and let you know. Do i run them when i get a screen or when no signal is active?
This command: "

PHP Code:

on -f hu-jacinto apixconfig -t 14 -w 2F 01 


", what does it do? Am i supposed to run this everytime i get no signal? Is your apix_vmon_off file completely empty, 0kb in size?
EDIT: Forgot to mention, when i get no signal, a restart fixes the issue and the HU works perfectly.