[jchisholm17]

Hey Guys,

Need some help with a module I had to replace.

I have a 2019 X3 M40i. Got the Emergency Call System Malfunction error and out of warranty. I already have replaced the Antenna, the ATM-01 (Telematics Module), and the backup battery. And obviously reseal.

I was able to code the ATM-01 Module using esys following these steps.

"Connect => Read FA (VO) => Activate FA (VO) => Read (ECU) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom one) => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE."

Doing this has cleared the Emergency Call System Malfunction error on my instrument cluster.

However some things still aren't working as they did prior to replacement.

- App is showing updated status of locked/unlocked and where the car currently is. However I cannot use the remote 3d view, cannot lock/unlock the car remotely.
- Cannot perform any of the emergency call functions either.

The internet does seem to be working on the car as I am able to access weather, news, update bmw assist, etc.

All of this was replaced with brand new hardware straight from the dealership. Any suggestions to get the app back to fully working and my sos button working again?