[youbarajs]

so you patched the cic until you got it working 100% with Europe map, then you inserted the stick for SEA map, put the code for it and installed SEA map?

Yes pretty much you have summarized it.
Europe Map needed code as well, so I used the CICFSC Generator to create 2010 Europe Map code and it started working.
Post that inserted new SEA Map of USB and it asked for Code again, used CICFSC Generator code for 2019 SEA Premium to update it

thanks . it s good to know it works. so you used an ECE specs cic and put SEA map in it and code it for Asia car. everything works as it should? (radio and other settings) ?

Yes, I also had a bit of a doubt and was wondering if its gonna work, but I think map region is not related to anything else, and you can update map to any region provided you have the right codes and that is where CICFSC Generator came in handy. I was also surprised to note that despite of "No Navigation", MAP is already loaded in the CIC, mine was 2010 EU Premium. CIC module "Country" still shows ECE and I did not change anything there.

Radio, USB, CD and other settings works as it was working before. The only little change I noticed was my CIC version, when I load CIC module in NCSExpert it shows CIC_08 for sometime and when I read ECU it changes back to CIC.C1A, but nothing much have changed in terms of any functionalities.