Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[TUTO] Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
|
30-09-2017, 07:42 AM,
(This post was last modified: 31-01-2019, 19:00 PM by mrle9.)
Post: #1
|
|||
|
|||
[TUTO] Activate Laptimer and Needle Sweep in 8P and 8J Dashboard
Hi ,
After few research I found the process for unlock Needle Sweep (aka Needle Staging) and LapTimer in Dashboard for 8P and 8J with White FIS. No need to replace eeprom software by a S3 software because function are present but disable in all white FIS dashboard. This mods was succesfully tested on all white FIS dashboard with part number below : A3 Dashboard (8P) (Dash with eeprom 24c32 and Micronas CDC3217G) : 8p0920931 8p0920932 8p0920901 8p0920983 (UK) TT Dashboard (8J) : 8J0920981 (UK) You need : 1x i2c programmer like CH341A , ezp2010 , minipro , ... 1x SOIC8 SOP8 Test Clip For EEPROM 93CXX/25CXX/24CXX in-circuit ----------------- Don't forget to add me Thanks and Reputation if you enjoy my job  Password is : lapneedlebymrle9  Bye EDIT About Boost & Oil Temp function : As I said in this thread I well know the bit address for adding boost and oil temp but I didn't found it myself, this information was given to me from an user that make business and ask me to not release this information to public .  If It was found by myself I would published this information but it was not the case and i respect the deal made with the user. Don't lost your time to ask me in this thread or by Private Message i will not answer. If you want it you will need to find it by yourself or wait this information by another user. 
|
