[bmwcoder75]

Hello, seen that error before, probably FA problem, not sure anymore, could anyone point me to the right direction, that would greatly help.
Thanks

Unit is ECE EVO HW 4.1. I used F30 FA and G30 FA with same results


[HU_NBT2 - 63 - swfl_0000271a-006_025_001] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_NBT2_0x63 [96% of swfl_0000271a-006_025_001]

[HU_NBT2 - 63 - swfl_0000271a-006_025_001] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_NBT2_0x63 [97% of swfl_0000271a-006_025_001]
[HU_NBT2 - 63 - swfl_0000271a-006_025_001] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_NBT2_0x63 [99% of swfl_0000271a-006_025_001]
MCDDiagService<id=333200, job=com.bmw.psdz.jobs.http.MCD3_PerformECUFlash_Http, service=RC_CHECK_MEMORY_HTTP - RoutineControl CheckMemoryHttp, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63>
[HU_NBT2 - 63 - swfl_0000271a-006_025_001] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_NBT2_0x63 [100% of swfl_0000271a-006_025_001]
[HU_NBT2 - 63 - swfl_0000271a-006_025_001] Transaction type: swDeploy;  Message: TA finished
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files.
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR

[HU_NBT2 - 63] finalizeECUFlash started
[HU_NBT2 - 63] finalizeECUFlash finished
[] There was an error, please check the log files.
[] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR