Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Peugeot 207 Valeo BSI eeprom 95128 km change to dashboard km and virgin please
|
10-07-2019, 12:33 PM,
(This post was last modified: 10-07-2019, 13:47 PM by ns79.)
Post: #3
|
|||
|
|||
|
RE: Peugeot 207 Valeo BSI eeprom 95128 km change to dashboard km and virgin please
Hi,
thanks a lot for help  I did write your BSI eeprom but still i have the same problems.ECU and BSI are from donors car...keys are not from donors car. Engine works and everything is fine. Only this BSI error and when I do the configuration in BSI after a while and removing the positive voltage, the settings return as they were on the donor's car i think (airbag problems, fog lamps, rear reverse light, etc ...) For ECU I did Immo off. Now I have a F4BA error in BSI ... and Antitheft on the display,too. Maybe the problem now is the difference in the VIN number between BSI and Dashboard? Also when i configure new chassis number with Diagbox after removing the positive voltage BSI restore the old chassis number?  Or maybe Steering Column Lock now is problem? I need this VIN number in ECU,BSI,Dashboard: VF34E9HXC9S188933 Please help and tell me where to go? I'm stuck for days with this already Regards Neven from Croatia |
