Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Repair Damaged Dump CAS2 E8x/E9x
26-08-2019, 12:13 PM,
Post: #1
|
|||
|
|||
Repair Damaged Dump CAS2 E8x/E9x
Someone can edit or repair this damaged dump from CAS2 ?
Unfortunately after clone in other CAS2, nothing is changed, CAS_ORI has been manipulated with bad results, works, but isn't possible to flash firmware with winkfp & ISTA\P, after disconnet main plug on CAS or disconnet battery need whenever syncronize EWS to start engine, on ISTA is permanent fault 00A0AD Processor Thanks in advance |