[Gustav Gans]

Hello,
a stupid question.
Can I instead of following this procedure
• Copy all the content from each disk in one folder (one folder/each disk) ex: “Disk 1”, “Disk 2”, “Disk 3”
• Each folder (ex Disk 1), must contain one “config.nfm” file and one “pkgdb” folder.
• Copy all three folders to your 32 GB USB stick (or separately on each stick if you're using 3 sticks)
• Move the file/folder found in the “DISK 1” directory (config.nfm and pkgdb) on the root of the USB drive
• Insert the USB stick into the USB port in the Glovebox (the center console will NOT work) as seen in the of the gallery.
• Follow the onscreen prompts, it will prompt for the FSC code
• The update will begin to load
• If you're using one 32 GB stick, when it prompts for the second USB, remove the USB stick, reconnect to your computer and delete config.nfm and pkgdb from the root of the drive. Move the file/folder found in the "Disk 2" directory (config.nfm and pkgdb) on the root of the USB drive Reinsert USB into the glovebox and allow it to continue updating.

Do this one here
Copy all content from all 3 USB Sticks to the root folder and update it? Instead of removing the stick go to the computer, delete files and start again.
The config.nfm is always the same and the pkgdb will be merged later anyway on the HDD.
Cheers