Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Mercedes W205 CRD3PLUS.A0 update went wrong
|
05-07-2023, 11:19 AM,
Post: #1
|
|||
|
|||
|
Mercedes W205 CRD3PLUS.A0 update went wrong
Hey guys,
I did something very stupid, I tried to update CRD3PLUS.A0 ECU with my PRODIAG because it updated all ecus until yet without problems. As always dont trust updating any ECU or TCUs, it started flash procedure but then the ECU died. What I did was to get a Bench read which I posted here in the attachment where I hope someone can repair myfile or provide matching file if there is no virtual eeprom at least. I also tried to find a donor flash and put it on the ECU but car does not start (at least shows no DTCS but whole car is full of comms errors), what the car even does now is that it even doesnt turn off the ignition where I had to remove battery. What options do I have, virginise ECU and relearn online? Can I do it without Xentry maybe with my PRODIAG or FVDI? Is it possible to repair ECU by getting a donor flash? ECU Label: FV 12.28 HW 12.04 PD 14M09 A6519004500 A6519004000 CRD3PLUS.A0 OM651 - SOL Best Regards kaya |
