[pavlo210482]

Hello everybody. mini f60 se 2018, wanted to install a 6wb instrument panel.

in esys the panel is not displayed

I have an entrynav2, with a touchscreen, carplay, navigation.

most optics are present in the main device, but were not active and there was no cable to the instrument cluster itself

I pulled the cable and activated the most optics by coding hu_entrynav (KOMBI_CIC: set to kombi high
EXTERNER_MOST: set to aktiv)

the optics lit up but there is no result, I changed the most cable to another, the instrument panel is not displayed in esys

the panel itself works, displays information about the car, but it is impossible to code it without the most optics

anyone have any ideas?