Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
35160wt 6wb r/w tool
|
17-02-2022, 09:06 AM,
Post: #11
|
|||
|
|||
|
RE: 35160wt 6wb r/w tool
I use CG Pro since years.
Some 35160WT eeprom take lot of time and need several tries. Others are simply not supported.. By trying to heat one to 100°, I ended up by damaging it.. Question: is there a solution for this cluster? original eeprom damaged - I have only BIN file read from it. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
17-02-2022, 09:11 AM,
Post: #12
|
|||
|
|||
|
RE: 35160wt 6wb r/w tool
If you also got read of eeprom ID you can put 35160dw. If you don’t have it bmw explorer have solution for brand new 35160wt check id error off.
|
|||
|
|
|
17-02-2022, 09:58 AM,
(This post was last modified: 17-02-2022, 10:03 AM by ccfj1.)
Post: #13
|
|||
|
|||
|
RE: 35160wt 6wb r/w tool
R270/r270+ with the Ukrainian v2 adapter board and updated AHC08 chip should do it.
Hmm, Upon further reading maybe not, reports seem to be varied. |
|||
|
|
|
17-02-2022, 10:41 AM,
Post: #14
|
|||
|
|||
RE: 35160wt 6wb r/w tool
(17-02-2022, 09:58 AM)ccfj1 Wrote: R270/r270+ with the Ukrainian v2 adapter board and updated AHC08 chip should do it. supports only. Erase 10-30 seconds/ 080DOWQ 160DOWQ 35160WQ 35080 3/6 35080 V6/VP 080D0WT 160D0WT These chips cannot be erased 35128WT, 35160WT!!! |
|||
| Reputation: +1 - ccfj1 [+1] | |||
|
|
|
17-02-2022, 11:08 AM,
Post: #15
|
|||
|
|||
|
RE: 35160wt 6wb r/w tool
Many thanks for the clarification.
|
|||
|
|
|
17-02-2022, 11:11 AM,
Post: #16
|
|||
|
|||
|
RE: 35160wt 6wb r/w tool
|
|||
|
|
|
17-02-2022, 11:57 AM,
Post: #17
|
|||
|
|||
RE: 35160wt 6wb r/w tool
(17-02-2022, 11:11 AM)smilo Wrote: From the read BIN file, eeprom ID can be retrieved ? No, you have to read it extra. Take a look on the attached picture. |
|||
|
|
|
17-02-2022, 12:04 PM,
(This post was last modified: 17-02-2022, 12:07 PM by smilo.)
Post: #18
|
|||
|
|||
RE: 35160wt 6wb r/w tool
(17-02-2022, 11:57 AM)Spitfire555 Wrote:(17-02-2022, 11:11 AM)smilo Wrote: From the read BIN file, eeprom ID can be retrieved ? I think I have only “ALL” file. I use CG Pro tool to read the eeprom. The tool doesn’t offer ID Read option. So it’s dead ? Nowhere to read this ID ? |
|||
|
|
|
17-02-2022, 12:11 PM,
(This post was last modified: 17-02-2022, 12:13 PM by Spitfire555.)
Post: #19
|
|||
|
|||
RE: 35160wt 6wb r/w tool
(17-02-2022, 12:04 PM)smilo Wrote: I think I have only “ALL” file.
|
|||
|
|
|
17-02-2022, 12:35 PM,
Post: #20
|
|||
|
|||
RE: 35160wt 6wb r/w tool
(17-02-2022, 12:11 PM)Spitfire555 Wrote:(17-02-2022, 12:04 PM)smilo Wrote: I think I have only “ALL” file. Thanks. Yes. I mean: I have only “Data” file. So no solution for this cluster ? Dead ? |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
|
Tool for bench read 8hp | Garryq | 10 | 1,919 |
03-06-2024, 20:05 PM Last Post: Vladica |
| CheckSum Tool v1.0 editor by Bahram Akhundov - Software are FREE | foxportal | 0 | 343 |
03-06-2024, 08:42 AM Last Post: foxportal |
|
| Engineering Tool | mertdavid | 4 | 968 |
01-06-2024, 17:57 PM Last Post: Stratofortress |
|
|
|
SSD Creator Ncsexpert (New Tool) | scorpium59 | 562 | 41,596 |
30-05-2024, 05:37 AM Last Post: wiese |
| GenEsys Creator (New Tool FA ESYS) | scorpium59 | 419 | 31,526 |
22-05-2024, 06:43 AM Last Post: alsamaraee |
|
|
Tool to use to cut leather dashboard for hud retrofit | Fx82 | 3 | 330 |
19-05-2024, 15:29 PM Last Post: Fx82 |
|
|
Tool for EGS 8HP replacement? | AlpinWeiss2k18 | 40 | 8,243 |
24-04-2024, 13:38 PM Last Post: BigManLT |
| TESTO tool with ICOM | Rolzs | 5 | 523 |
17-03-2024, 20:23 PM Last Post: Vojno |
|
|
|
Tool for OBD read / write ZF 8hp | TIGHTFIN | 7 | 870 |
10-03-2024, 07:46 AM Last Post: syrus |
|
|
Tool for 35160 eeprom | Emmy67 | 19 | 3,035 |
28-02-2024, 13:44 PM Last Post: Adekborys69 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
