Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
08-06-2015, 09:53 AM,
Post: #11
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
(07-06-2015, 21:15 PM)kerekt Wrote:<=> Please can some one remote my PC , i have tried but does not work swaped ini file no go . Thanks(02-06-2015, 20:43 PM)Legisin Wrote: Hi |
|||
08-06-2015, 10:06 AM,
Post: #12
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
This will work with nissan consult 4?
|
|||
08-06-2015, 16:43 PM,
(This post was last modified: 08-06-2015, 17:46 PM by Inspector_Gadget.)
Post: #13
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
(08-06-2015, 10:06 AM)zuzuss Wrote: This will work with nissan consult 4? Consult 4 is clone consult 3 , it is same thing!! Consult III plus has j2534 implementation and has validated the same J2534 Tools as NER's with the same access authority of 1, In Which the VI is Included. VI2 has a different access authority of 2 the access determines the database use, this can be seen when you have used the soft by opening up the DiagnosticTool.ini file and looking at the [Tab index] it will be 1 if using passthru. Anyway back to your question. Yes your Consult 4 can work with PLUS Version but you will be limited to around 2012 vehicles and have same functions of standard consult 3, Mainly because you tool is not covering new protocol covered by the VI2 and Plus authority access. If you find an tool that covers all protocols and edit some files then the software can work well with Pass thru |
|||
11-06-2015, 08:24 AM,
Post: #14
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
Can you help me to edit the files? thx
|
|||
11-06-2015, 10:31 AM,
Post: #15
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
|
|||
11-06-2015, 11:26 AM,
Post: #16
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
How to test? i make inside picture...
|
|||
11-06-2015, 17:14 PM,
(This post was last modified: 11-06-2015, 17:16 PM by Inspector_Gadget.)
Post: #17
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
|
|||
16-06-2015, 23:30 PM,
Post: #18
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
IF you want to use it as "Generic" PassThru (J2534) VCI, You need To Replace "DiagnosticTool.ini"
replace the file in which maybe someone will give path tx |
|||
11-07-2015, 22:54 PM,
Post: #19
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
Hello.
Abritus just relased a new update for passthru for Nissan, any body tried? |
|||
13-07-2015, 03:01 AM,
Post: #20
|
|||
|
|||
RE: Nissan Consult III+ Plus 46.11.00 + 46.20.00 + 46.30.00
I keep on getting an error at the very end saying the " wizard was interrupted before consult 3 plus could be installed" I am installing this on a window's 8 labtop and I set the software run under "xp sp3" compatibility. What am I doing wrong? Also does anyone have an install docs?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content