[sulibrk]

hello, i have installed odis-e with no problem, I only need to know, where the helll shall i put projects file.

When i unpack it, i see folder marked as "audi" "skoda" "seat" ... etc...

but... where to put them, what is a correct folder and look. I have all the files packed in separate archives, so do i need to totally unpack them all?

each project folder looks like "audi-lots of archives+odx file"

And then, when I try to connect to vehicle, it shows me strange error of cannot connect.

Odis-s works fine, but this one not.

I have some old clone of VAS5054

[2pac4u]

hello, i have installed odis-e with no problem, I only need to know, where the helll shall i put projects file....

You must open Odis-e and insert manually this folder....and after "Save" all projects will load 

[orkaskawina]

Hey

I have a problem, it does not connect to the ODS2522E error head
I would add that odis-s 4.2.3 works both on soft 1.20.42_OK_UPD

[arno2]

Hi Guys

Can someone post a link for:

PostSetup_117.0.100

Projekte_117.0.100

the old ones are all dead

thank you in advance

[Tadk]

Hi Guys

Can someone post a link for:

PostSetup_117.0.100

Projekte_117.0.100

the old ones are all dead

thank you in advance

links corrected

[cicciot]

Hello,

Thanks  in advance for help:
I have installed Odis E. 8.23 and all ok, I would like update with postsetup and project 117.060 + 117.100 how can I do? I know how update project, ( in diagnostic data, save and load odx project) but I don't understand how update postsetup 60 e 100.

[Tadk]

cicciot open the Postsetup file in a virtual drive, or
unpack the archiver. Run the program and in the update window specify the path to the folder.

[cicciot]

cicciot open the Postsetup file in a virtual drive, or
unpack the archiver. Run the program and in the update window specify the path to the folder.

thanks for reply,

I have extract postsetup file iso with win rar, I have followed all' the instructions but  I can't make it work, can you do an example please?
update window is this right?

[Tadk]

cicciot open the Postsetup file in a virtual drive, or
unpack the archiver. Run the program and in the update window specify the path to the folder.

thanks for reply,

I have extract postsetup file iso with win rar, I have followed all' the instructions but  I can't make it work, can you do an example please?
update window is this right?

Yes, right, also do the following and restart the program.

[Isaintel]

no rfor reall
i dont get it
i install it three times and im stocked
step 1 install it with certifiction reboot
step 2 copy launcher and plugins folder
insert it on C:\Program Files (x86)\Offboard_Diagnostic_Information_System_Engineering folder
step 3 run launcher in C:\Program Files (x86)\Offboard_Diagnostic_Information_System_Engineering
and it gives me the error message CANT FIND MSVCR100.dll


please HELP need a install instructions for ROOKIESSSS

THNX