[crypt0ninja]

thanks for your time.
I tried installing XDOS 23.6.3 last night, and kept failing at recognizing keys. Always says keys invalid. When i run the first batch file, i kept getting message, pipe doesn't exist (not exact working, but something along those lines) is that normal to see it? went thru all the installs, until turns off. I did run patch with admin privilege's. Something i'm doing wrong?

Thanks

Is Antivirus disabled or did you set appropriate exceptions?

Did you disable Secure Boot in BIOS? This is a must.

Do you have UAC disabled? This is recommended.

The warning message that you mention appears when the batch launches the setup executables, but you can ignore those warnings as they don't affect the process and are not the cause of your problem.

I suspect you either have Secure Boot enabled, or the ConnectorAPI installation was blocked/interrupted by UAC or Antivirus during the batch process...

[arak143]

Hi i have problem with xentry login, when i use login and password from Your redme file it refuses and says incorect login.... what am i doing wrong because all i seting as written in redmy fiel

[iDIDNTdoIT]

thanks for your time.
I tried installing XDOS 23.6.3 last night, and kept failing at recognizing keys. Always says keys invalid. When i run the first batch file, i kept getting message, pipe doesn't exist (not exact working, but something along those lines) is that normal to see it? went thru all the installs, until turns off. I did run patch with admin privilege's. Something i'm doing wrong?

Thanks

Is Antivirus disabled or did you set appropriate exceptions?

Did you disable Secure Boot in BIOS? This is a must.

Do you have UAC disabled? This is recommended.

The warning message that you mention appears when the batch launches the setup executables, but you can ignore those warnings as they don't affect the process and are not the cause of your problem.

I suspect you either have Secure Boot enabled, or the ConnectorAPI installation was blocked/interrupted by UAC or Antivirus during the batch process...

Ordered a new laptop and will start fresh, i'm sure you right, secure boot on, i thought i was off. Need another laptop, might as well get a fresh start. Thank You

[crypt0ninja]

I have decided to remove my 2023.09 solutions for XPT and XDOS until the final versions have been released.

Once the final builds for 2023.09 have been released, I will release updated solutions for them.

I have also switched archive compression from ZIP to 7-Zip.

[iDIDNTdoIT]

thanks for your time.
I tried installing XDOS 23.6.3 last night, and kept failing at recognizing keys. Always says keys invalid. When i run the first batch file, i kept getting message, pipe doesn't exist (not exact working, but something along those lines) is that normal to see it? went thru all the installs, until turns off. I did run patch with admin privilege's. Something i'm doing wrong?

Thanks

Is Antivirus disabled or did you set appropriate exceptions?

Did you disable Secure Boot in BIOS? This is a must.

Do you have UAC disabled? This is recommended.

The warning message that you mention appears when the batch launches the setup executables, but you can ignore those warnings as they don't affect the process and are not the cause of your problem.

I suspect you either have Secure Boot enabled, or the ConnectorAPI installation was blocked/interrupted by UAC or Antivirus during the batch process...

new laptop, win11, secure boot disabled, worked like a charm. Thank You

[crypt0ninja]

UPDATE RELEASED: V1.6

Changelog:
- Added automation of necessary Windows Defender exclusions into the batch process.
- Added HHTWin SDconnect solution by 'R00TR0w aka DieTRih' (XDOS ONLY)


Enjoy.

[r0my81]

I can't get connection, seems like ignition is not recognized. I'm using vas 6054 good clone. it's recognized by Xentry but when I try to perform disgnosis always error check vci connection or something like that.

Do you have any clue about that?

[crypt0ninja]

I can't get connection, seems like ignition is not recognized. I'm using vas 6054 good clone. it's recognized by Xentry but when I try to perform disgnosis always error check vci connection or something like that.

Do you have any clue about that?

Sorry I have not used VAS 6054, only Openport 2.0...

Your issue is not related to this fix as it works for many others...

Hopefully someone can assist you with the VAS6054 issue!

---

I will be releasing an interesting update today

Here's the upcoming addition to v1.7:

- Added and automated installation of a valid ZenZefi After-Sales STANDARD certificate into the batch process.


Big thanks go to the anonymous user who got in touch and supplied me with a valid cert to add to this FREE solution to make it a true AIO full fix solution for XPT/XDOS <3

I have implemented and tested the update and it works just carrying out some further tests/adjustments before releasing updates for both XPT and XDOS today.

Stay tuned.

[crypt0ninja]

UPDATE RELEASED: V1.7

Changelog:

- Added and automated the installation of a valid ZenZefi After-Sales STANDARD certificate. BIG thanks go to the anonymous user who supplied the certificate <3

- Added donation information to 'READ THIS FIRST!!!.txt' for users that would like to show their support and enable me to continue providing an updated/valid ZenZefi certificate.


Enjoy!

[crypt0ninja]

We made it to the important threads section <3