[sebastianfernandes]

Hello Guys!!
Today i finally managed to change my cic vin to the fsc pack i have and load the fscs using FSTOOL. Earlier i could only do 17 and 19. 1B always returned error 7009. After scratching my head for couple of days i finally managed to resolve ERROR 7009, and load 1B. The solution is old SGDAT FILES in car server. Just copy paste new ones from LATEST SP DATEN to CARSERVER SGDAT. Also now i can issue check fsc on 17, 19 and 1B for updating maps and it works flawlessly without errors.

[zfrepairtm]

Can you confirm these steps:




Modify 1B to 19 in parameters

hi guys,

does this settings works on the Fxx series ?
Can i use fstool for F10 or i should use esys ?
thanks

[shawnsheridan]

hi guys,

does this settings works on the Fxx series ?
Can i use fstool for F10 or i should use esys ?
thanks

FSTool is E-Series only. For F10, you must use E-Sys.

[fumantwo]

Hello Guys!!
Today i finally managed to change my cic vin to the fsc pack i have and load the fscs using FSTOOL. Earlier i could only do 17 and 19. 1B always returned error 7009. After scratching my head for couple of days i finally managed to resolve ERROR 7009, and load 1B. The solution is old SGDAT FILES in car server. Just copy paste new ones from LATEST SP DATEN to CARSERVER SGDAT. Also now i can issue check fsc on 17, 19 and 1B for updating maps and it works flawlessly without errors.

I´m having the same issue, when trying to check 1B gives error 7009, but with the 19 works without any problem. Also update sgdat of the carserver but ... no way to check 1B fsc.

[BigManLT]

Hey,
enyone know how to delete fsc codes from e/f seria cic?

[sebastianfernandes]

Hello Guys!!
Today i finally managed to change my cic vin to the fsc pack i have and load the fscs using FSTOOL. Earlier i could only do 17 and 19. 1B always returned error 7009. After scratching my head for couple of days i finally managed to resolve ERROR 7009, and load 1B. The solution is old SGDAT FILES in car server. Just copy paste new ones from LATEST SP DATEN to CARSERVER SGDAT. Also now i can issue check fsc on 17, 19 and 1B for updating maps and it works flawlessly without errors.

I´m having the same issue, when trying to check 1B gives error 7009, but with the 19 works without any problem. Also update sgdat of the carserver but ... no way to check 1B fsc.

Try to update SGDAT AND DATEN Folder inside Carserver and check it out. what interface are you using?

[fumantwo]

Try to update SGDAT AND DATEN Folder inside Carserver and check it out. what interface are you using?

Will update SGDAT and DATEN of the carserver too, thank´s for the advice. I´m afraid, that I am in the same point as you hehe. ... 17 and 19 works, and are accepted, but when you try to do with the 1B looks like the program get stuck and finally drops error 7009.

I´m using an icom.

[sebastianfernandes]

Try to update SGDAT AND DATEN Folder inside Carserver and check it out. what interface are you using?

Will update SGDAT and DATEN of the carserver too, thank´s for the advice. I´m afraid, that I am in the same point as you hehe. ... 17 and 19 works, and are accepted, but when you try to do with the 1B looks like the program get stuck and finally drops error 7009.

I´m using an icom.

Great
For Your Info I used SP DATEN V57 FOR E89 TO UPDATE CARSERVER. AS I HAVE AN E89.

[fumantwo]

No luck with the tip of the update ... 17, 19 and 9C worked without problems but the 1B remains with the same issue, fstool gets stuck and finally drops error 7009

[sebastianfernandes]

No luck with the tip of the update ... 17, 19 and 9C worked without problems but the 1B remains with the same issue, fstool gets stuck and finally drops error 7009

Funmantwo
I would suggest you to make the cic virgin with a virgin software controller and also delete data01, data02 and data03 in /mnt/hbdebug and try to import again all Fsc with fstool. [/b]