[bmwcoder75]

I am now on the lookout for a B2xx and Hw3.x HU.

HW 2.x with MODEL B2XY is ok too
Most important thing is MODEL B2XY so you know it has 4GB memory

[330d]

I am now on the lookout for a B2xx and Hw3.x HU.

HW 2.x with MODEL B2XY is ok too
Most important thing is MODEL B2XY so you know it has 4GB memory

Thanks again.

I will get back to you soon. Also confirmed my car does not have KAFAS. It has High Beam Assist but this using different camera, not KAFAS.

So hopefully this all helps for installation.

[torchia]

You will need FSC package for EVO and flashing to full spec which i believe is around 100euros these days. Don't try to connect EVO without emulator on to the car! Finish it on the bench then connect it.

[bmwcoder75]

You will need FSC package for EVO and flashing to full spec which i believe is around 100euros these days. Don't try to connect EVO without emulator on to the car! Finish it on the bench then connect it.

No big deal with new BIN file and FSC files matching the car's VIN component protection will be disabled after reboot.
Very easy to remove component protection manually anyway

[Marteuk]

what about 2010 F11 with built in CIC. Which nbt unit, what hw number, and what extras for full retrofit? vin: c451860

[larshutten]

what about 2010 F11 with built in CIC. Which nbt unit, what hw number, and what extras for full retrofit? vin: c451860

-Check ZGW version depending on that you can flash it to ZGW 4sk. Or buy a 4sk and some other work on ZGW depending on what you are going to do.
-Change wiring according to diagram.
-HW07 NBT unit is needed!!
-custom coding.
-FSC set but you can buy those on almost every streetcorner these days.

Also keep an eye on your combox/internet options. Combox doesn't work with NBT so you have to remove it. There is a way to keep most of your options by coding the NBT to take data from your phone over bluetooth, search and you will find.

If you don't recognize anything of the above please do not start the retrofit but ask someone with experience to do it for you.

[ChampioNbg]

Hello,

can I ask you here about CIC retrofit on F11 09/2010 with small screen and WITHOUT Navigation system.
According Esys TAL calculation - ZGW has to be changed
According Part number - there are 2 ZGW modifications but with the SAME partnumber.

Can I just programm the ZGW with the new SW using "HW from SVTist" option or it should be changed?

Thanks in advance!

Greets

[ChampioNbg]

Hello,

nobody have an idea whether it will work with flash ?

Thanks