[Starmobile]

Does this version have a constant voltage mod?

No. Its a clean ISTA-P.

Hi,i installed software follow instruction, Rheingold function perfect but ista-p have error for create new session (unable to select a session management) i leave attachment,thanks in advance.

[tommyarbi]

Does this version have a constant voltage mod?

No. Its a clean ISTA-P.

Hi,i installed software follow instruction, Rheingold function perfect but ista-p have error for create new session (unable to select a session management) i leave attachment,thanks in advance.

Firewall and Private network etc . Must be off (run as admin)

[Starmobile]

Does this version have a constant voltage mod?

No. Its a clean ISTA-P.

Hi,i installed software follow instruction, Rheingold function perfect but ista-p have error for create new session (unable to select a session management) i leave attachment,thanks in advance.

Firewall and Private network etc . Must be off (run as admin)

Hi,i just recheck for turn off firewall and turn off wi-fi and all is ok,i succeed to reflash all vehicule modules after icm and eps module replacement,thanks.

[aduluck69]

I am looking for the CHINA SQLiteDBs files on this forum for Ista-D 3.53.13

[Starmobile]

I am looking for the CHINA SQLiteDBs files on this forum for Ista-D 3.53.13

Hi,i need info about ista/p if this programming files is compatible with us/canada vehicule or just for europe,because after programming acsm and replace icm module i had 4 trouble codes in acsm and this codes if i follow diagnostic in reingold the description is acsm alteration (ece and us airbag system is different) so i reinstall old icm module for other car i just code module with ista/p and all is ok,thanks in advance.

[popey_M]

Anyone have Portuguese SQLiteDBs?
Thanks for all

[Toshu]

Hy!
I have a problem with Rheingold. I used to Winrar that exctract. I try to several time, just C:/, later Programme, latest Programfiles, alwasy in Rheingold map. I copied SQDB correct location. But the problem is same. When I start to Istagui the Windows answer :"Failed to start ISTA. please make sure your ISTA configuration is valid. IN doubt reset any non sarted ISTA configaration and reistall ISTA." After the Rheingold dont start.
What the mistake?? (ISTAP is runing normally)
Thanks!!

[psya]

C:\Rheingold\Rheingold\TesterGUI\bin\Release

Is it normal that is empty ?

I'm trying for 2 days to make it work but can't understand y is it empty...

[Ndc1992]

I can not get k+dcan cable to communicate with any vehicles. The light on the 16pin blinks when trying to but will not identify car. I'm assuming bad cable?

Also, how do you set up ENET cable to work with ista

[bm_tech]

Anyone know why i don't have the different chassis data, when vin and a short test is not needed?

if i just want to check a repair or something by choosing the model, engine and year etc?

mine is just blank

nick