Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
FSTOOL
27-08-2015, 20:51 PM,
Post: #221
|
|||
|
|||
RE: FSTOOL
For sure it is working as i am using it i saw on ebay used ones at $9. maybe it helps others which can't find dlink or the shipping costs are triple than the adapter itself(us to europe or vice versa).
|
|||
01-09-2015, 11:08 AM,
Post: #222
|
|||
|
|||
RE: FSTOOL
(05-08-2015, 10:05 AM)KEEEN Wrote: thanks vneno that works now. No final happy result but at least loading up the fsc (10-08-2015, 06:03 AM)drimau Wrote: For FSC 9C you have to wait quite sometime for it to be fully active due to CIC need to extract zip file from the EEPROM and make changes to its file system. For me, I leave it 1 hour. (10-08-2015, 13:27 PM)Schmidti Wrote: Thank you very much but i've tried this way many times. (10-08-2015, 20:13 PM)drimau Wrote: You have to wait until the CIC update your FSC status. Patient must be one of your friends, especially for FSC 9C and 6F. The status loaded then you just wait for the status change to activate. KEEEN or Schmidti, you happened to activate FSC code after loading to CIC? I have the same problem, after executing "Store FSC" FSC status: loaded. I waited a while, turn off the car, start car another day, nothing happens, "FSC status: loaded"... |
|||
01-09-2015, 16:47 PM,
Post: #223
|
|||
|
|||
RE: FSTOOL
(01-09-2015, 11:08 AM)XAViER Wrote:(05-08-2015, 10:05 AM)KEEEN Wrote: thanks vneno that works now. No final happy result but at least loading up the fsc If you do it right it take same time for every code 1B 17 19 9C does not matter, if its say "FSC status: loaded" no way it start to work because its need to be aktive some seconds after importing, you not need click on Store FSC but need choose (Activate Upgrade) why i don't know but this option does more than only store the FSC, also take care that the VIN is set to CIC before import FSC because FSC looks to VIN, if the vin is different its not working. If someone needs full FSC kit from a car to test send me PM. |
|||
01-09-2015, 22:34 PM,
Post: #224
|
|||
|
|||
RE: FSTOOL
Activate upgrade = Activate update (STORE_FSC) + CHECK_FSC. Activate upgrade must be used. If you used STORE_FSC, next you must do CHECK_FSC. Apps FSC is accepted right after upgrade, apps starts to work in maybe 1-5 minutes.
|
|||
02-09-2015, 18:00 PM,
Post: #225
|
|||
|
|||
RE: FSTOOL
(01-09-2015, 22:34 PM)ap90500 Wrote: Activate upgrade = Activate update (STORE_FSC) + CHECK_FSC. Activate upgrade must be used. If you used STORE_FSC, next you must do CHECK_FSC. Apps FSC is accepted right after upgrade, apps starts to work in maybe 1-5 minutes. OK, but what is the first step: 6NR -> FA -> code CIC and then import 9C FSC or import 9C FSC and then change FA & code CIC? |
|||
02-09-2015, 20:29 PM,
Post: #226
|
|||
|
|||
RE: FSTOOL
It does not matter which one you do first. I install fsc first and then code.
|
|||
03-09-2015, 00:22 AM,
Post: #227
|
|||
|
|||
RE: FSTOOL
Hey Guys,
Struggling to import 6F code to 2010 X5. Was getting 10802 errors but tried manipulating GDaten files and CarServer folders as described in this post, which resolved that. At this point my status is as follows: FSC Status: Loaded FSCS Cert: Accepted Sig Cert Status: Accepted Root Cert Status: Accepted SW Signature Status: Accepted Requested SWID [6F/1] found Any idea how I get the FSC to accepted? When I try to activate Upgrade I get error in carserver 2090. Thanks |
|||
03-09-2015, 11:08 AM,
Post: #228
|
|||
|
|||
RE: FSTOOL
(03-09-2015, 00:22 AM)X52010 Wrote: Hey Guys, 2090 = Authentification format error Hint: in file C:\EC-Apps\CarServer\mkp-1\cipb_svc-1.ini "LogLevel = LOG_NONE" change to "LogLevel = LOG_ALL" run job and then see file "C:\EC-Apps\CarServer\mkp-1\error.log" |
|||
04-09-2015, 00:11 AM,
Post: #229
|
|||
|
|||
RE: FSTOOL
Thanks. Getting this in the log. Tried to update some of the folders from new Daten but no luck.
ERROR! Modul: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8 CANNOT FIND ECU IN SG-ID-FILE ERROR! Modul: KrApiLib.cpp, Proc: GetAuthKey, LineNr: 625, ErrorNr: -8 CANNOT FIND ECU IN SG-ID-FILE [19:04:44.515] [2015-09-03] [CarServer] 2090 Error COAPI2.CPP coapiRunCabd 6 [19:04:44.515] [2015-09-03] [CarServer] Authentisierung Formatfehler STORE_FSC |
|||
06-09-2015, 15:00 PM,
Post: #230
|
|||
|
|||
RE: FSTOOL
(04-09-2015, 00:11 AM)X52010 Wrote: Thanks. Getting this in the log. Tried to update some of the folders from new Daten but no luck. Not enough info, need full log. (01-09-2015, 11:08 AM)XAViER Wrote: KEEEN or Schmidti, After some research I made it: FSC status: accepted. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Help FSTOOL[11049] CIC retrofit | Rawediag | 13 | 3,240 |
01-12-2023, 12:17 PM Last Post: NeRkO20 |
|
FSTool 2.0.2.1 without viruses | LeonidLunin | 15 | 3,000 |
13-07-2023, 10:23 AM Last Post: NAVJunk |
|
E70 Certs, how to 'virginize' CIC or get FSTool working? | Tawa | 5 | 1,241 |
20-01-2022, 07:59 AM Last Post: ccfj1 |
|
FSTool Import Issues - 6F and 9C Only | mxchris727 | 5 | 1,303 |
01-10-2019, 00:11 AM Last Post: codemybmw |
|
Help with CIC patch, fstool | duss46 | 2 | 900 |
09-09-2019, 21:32 PM Last Post: duss46 |
|
fstool any help how to use and connect !!??? | rana | 0 | 438 |
07-06-2019, 07:26 AM Last Post: rana |
|
HELP INSTALL FSTOOL | atalay | 3 | 967 |
23-04-2019, 20:32 PM Last Post: ____ANGEL___ |
|
Problems with insert fscs with fstool | atalay | 7 | 1,512 |
14-04-2019, 10:17 AM Last Post: atalay |
|
FSTool Error | spk1338 | 2 | 1,313 |
02-02-2019, 01:37 AM Last Post: flacoramos |
|
FSTOOL installation problem | yzc729 | 14 | 8,777 |
11-10-2018, 09:24 AM Last Post: Sanyi85 |
Users browsing this thread:
11 Guest(s)
11 Guest(s)
Return to TopReturn to Content