Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Programming KOMBI and NBT fails on F series
23-09-2015, 16:07 PM,
Post: #21
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Dhcpsrv is not for using with a separate router in my example, it emulate a router, so that you have no need for a separate router.
I only use this way , i have no idea how to configurate a separate router together with dhcpsrv, because i have no need. |
|||
23-09-2015, 16:10 PM,
(This post was last modified: 23-09-2015, 16:11 PM by Lpapp.)
Post: #22
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Hello!
I flashed several F10,F20 with 3.56.4 and ICOM A2 through dhcp and its working well. MOST connection will be used in Exx series, i flashed also some R56 and many E91 with most connection. Do you use ICOM A2 or A? Flashing MOST is possible only via LAN, no possible to flash about original wifi, its noticed in some technical documents for ista p. P.S. many thanks for hulahans help for configuration. |
|||
24-09-2015, 04:23 AM,
Post: #23
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Dear hulahans:
I didn't use a seperate rounter and dhcpscr simutiniously.only for software "dhcpsvr 2.5.0.0" to test.it couldn't solve this MOST issue. so,could you help me to correctly configurate dhcpwiz,see your PM.thanks! Dear Lpapp: This issue is relational with i-level,my car is MY 2013,and if your car is above the limited i-level,so you can programming MOST by ICOM ok. To All member: I tried connected a Wireless rounter,but "ICOM A2-rounter-LAN" connnection is good for MOST programming,"ICOM A2-rounter-WiFi" connnection is failed for it,What's different for allocating IP to two modes?thanks. |
|||
24-09-2015, 10:32 AM,
Post: #24
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Ok Winter ,so upload the ini file from dhcpsrv ,or copy text that is inside, here.
I will compare with my one. |
|||
29-09-2015, 20:20 PM,
Post: #25
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
No way to update them with icom? how ista-p can done it? why e-sys need enet cable?
If this post helped you don't forget to press rep and thanks
|
|||
30-09-2015, 14:52 PM,
Post: #26
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
|
|||
30-09-2015, 15:59 PM,
Post: #27
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
I have forgotten in pn, wlan on laptop has to be off
|
|||
01-10-2015, 02:55 AM,
Post: #28
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
(30-09-2015, 15:59 PM)hulahans Wrote: I have forgotten in pn, wlan on laptop has to be off Dear hulahans: I made a connection like this:OBD connecter-ICOM A2-LAN cable-wireless rounter. 1.then first time connected a LAN cable from LAN port to computer,so a F30 programming MOST ok; 2.the second time WiFi connected to computer,ISTA/P can execute the measure plan,but MOST modules were failed to programming yet. So my question is What's difference about IP assigned with LAN and wifi connection?thanks. |
|||
01-10-2015, 14:46 PM,
Post: #29
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
Sorry, don t know
|
|||
04-10-2015, 08:20 AM,
Post: #30
|
|||
|
|||
RE: Programming KOMBI and NBT fails on F series
For the Error in NBT and Kombi - just make a Batterie RESET and Flash it one more time - than works.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content