Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P 3.57.0.400
01-11-2015, 08:22 AM,
Post: #91
RE: ISTA-P 3.57.0.400
(01-11-2015, 00:48 AM)Studie Wrote:  The logs are not text files how do I open them to read?

They must have extension .7zip.log

The file format is as follows.
YYYYMMDD_HHMISS_3.57.0.400_4.1.1_InstallerLogs.7zip.log

You must change the extension .7zip.log by .zip (eg)
Then, you can open the file with WinZip

A greeting
ATC

If any of my posts or current one helps then don't forget to press thanks and add a reputation. thumbsup
Quote this message in a reply
[+] 2 users say Thank You to ATC for this post
01-11-2015, 13:21 PM,
Post: #92
RE: ISTA-P 3.57.0.400
(01-11-2015, 00:48 AM)Studie Wrote:  
(31-10-2015, 21:16 PM)ruben_17non Wrote:  
(31-10-2015, 19:49 PM)Studie Wrote:  
(31-10-2015, 19:33 PM)ruben_17non Wrote:  
(31-10-2015, 19:10 PM)Studie Wrote:  Having trouble installing on top of my existing install.

I already un-installed the older ista-p, and tried to install on top but no luck.

Could anyone advise how to fix this problem? Much thanks.

Check log. you have space in HDD?

Yes I am using a 750GB HDD. Where is the log saved to?

Thanks

If you have ISTAP V56 the best way is remove.
Check log in:
C:\ProgramData\BMW\ISPI\Logs\TRIC\ISTA-P


The logs are not text files how do I open them to read?

Unpack with winrar or other, after this open files with TExt editor
and search error in final of text

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if This post help or is usefull for you! Not is needed write just only thanks in Threads thumbsup
Quote this message in a reply
[+] 2 users say Thank You to ruben_17non for this post
01-11-2015, 16:33 PM,
Post: #93
RE: ISTA-P 3.57.0.400
(31-10-2015, 19:10 PM)Studie Wrote:  Having trouble installing on top of my existing install.

I already un-installed the older ista-p, and tried to install on top but no luck.

Could anyone advise how to fix this problem? Much thanks.

I ran into this problem attempting an upgrade from ISTA-P 3.56.3.002. For that version, I wasn't given an installer, so I had copied the bits directly to C:\ISTA-P. Without cleaning anything up first, I attempted to run the MSI and saw this same error.

I don't think it's a HDD space issue or memory issue as those checks are much earlier in the installer. And there's a specific message in the logs about failing the hardware check in this case.

I didn't attempt to resolve the issue in my case, as this was running ISTA-P in a VM, so I reverted to a checkpoint before ISTA-P was copied and run. The installer worked fine in a clean VM.

You can try running the MSI with more logging info by using this command:
"msiexec /l* ista-p.log /i BMW_ISPI_ISTA-P_SYS_3.57.0.400.msi"

Perhaps this will point to why the installer is stopping.
Quote this message in a reply
01-11-2015, 17:21 PM,
Post: #94
RE: ISTA-P 3.57.0.400
(01-11-2015, 13:21 PM)ruben_17non Wrote:  
(01-11-2015, 00:48 AM)Studie Wrote:  
(31-10-2015, 21:16 PM)ruben_17non Wrote:  
(31-10-2015, 19:49 PM)Studie Wrote:  
(31-10-2015, 19:33 PM)ruben_17non Wrote:  Check log. you have space in HDD?

Yes I am using a 750GB HDD. Where is the log saved to?

Thanks

If you have ISTAP V56 the best way is remove.
Check log in:
C:\ProgramData\BMW\ISPI\Logs\TRIC\ISTA-P


The logs are not text files how do I open them to read?

Unpack with winrar or other, after this open files with TExt editor
and search error in final of text

I was only able to find an error in the LaunchInstallation.log text.

PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Datei existiert weder auf Distributionsmedium noch im Zielverzeichnis ErrorFileNotFoundInSourceOrTarget
31/10/2015-8:57 PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Fehler bei Ausfuehrung ErrorFailedExecute
31/10/2015-8:57 PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Installation fehlgeschlagen ErrorFailedInstallation
31/10/2015-8:57 PM ERROR: Installationsvorgang fehlgeschlagen (ErrorCode: ErrorCode:Invalid #-2)
31/10/2015-8:57 PM ERROR: Setzen des Installationsmodus fehlgeschlagen. Breche Installation ab.
31/10/2015-8:57 PM ERROR: Konfigurieren und Starten des IFS-Installers fehlgeschlagen.
31/10/2015-8:57 PM ERROR: CustomAction 'LaunchInstallation' fehlgeschlagen.

And the PreinstallCleanup.log


31/10/2015-8:55 PM ERROR: Janitor.WipeFingerprints(): Unable to delete fingerprint directory since it doesnt exist
Quote this message in a reply
03-11-2015, 21:21 PM,
Post: #95
RE: ISTA-P 3.57.0.400
I use ISTA / P with original ICOM and in the new ISTA / P is not displayed ICOM. Does anyone here have also found this problem and have a solution?
Quote this message in a reply
03-11-2015, 21:46 PM,
Post: #96
RE: ISTA-P 3.57.0.400
(03-11-2015, 21:21 PM)hojo29 Wrote:  I use ISTA / P with original ICOM and in the new ISTA / P is not displayed ICOM. Does anyone here have also found this problem and have a solution?

Press small button on the top of ISTA - connection manager, it is look like a small book. ISTA should adapt ICOM which own requirements and update firmware if necessary. Did you turn off all firewalls and antyvirus softwares ?
Quote this message in a reply
03-11-2015, 21:48 PM,
Post: #97
RE: ISTA-P 3.57.0.400
Firmware update necessary

Hit Thanks and Reputation button if this post helped you.
Quote this message in a reply
03-11-2015, 22:14 PM,
Post: #98
RE: ISTA-P 3.57.0.400
Ok will test it again tomorrow.
ICOM firmware is already installed new
Quote this message in a reply
04-11-2015, 20:55 PM,
Post: #99
RE: ISTA-P 3.57.0.400
What is the latest icom firmware?
Quote this message in a reply
04-11-2015, 21:52 PM,
Post: #100
RE: ISTA-P 3.57.0.400
03-14-03
ICOM-BootImage-01-25-02
ICOM-ApplicationImage-01-40-05
Quote this message in a reply
[+] 2 users say Thank You to masa52 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,754 694,007 9 minutes ago
Last Post: hamzettin
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 116 14,691 1 hour ago
Last Post: NeRkO20
  Lowering g05 lci with ista Zenel6GT 11 514 2 hours ago
Last Post: NeRkO20
XZBMW ISTA 4.47.3x I-LEVEL+OVERVIEW AutoExe3219 0 69 11 hours ago
Last Post: AutoExe3219
XZBMW Requesting ISTA-P VO.xmldb for this VIN: WMWZB3C57CWM30715 BMWF01 1 57 Yesterday, 13:40 PM
Last Post: ____ANGEL___
XZBMW ISTA+ 4.47.3x Install Files - MEGA shawnsheridan 2 582 22-05-2024, 23:03 PM
Last Post: ctgy8923
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 323 125,183 21-05-2024, 10:44 AM
Last Post: vld
  Dutch language package ista 4.45 db8000 0 59 19-05-2024, 05:01 AM
Last Post: db8000
XZBMW HELP NEEDED TU UPDATE ISTA D 4.41.50 TO 4.42.12 ipcsr76 1 416 18-05-2024, 08:53 AM
Last Post: piteerus
  ista 4.46 Standalone kiranabc 112 15,942 16-05-2024, 12:20 PM
Last Post: flterence

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content